Some LCDC IRQ stuffs. Working on fixing ldm_a

[fpgaboy.git] / GBZ80Core.v

diff --git a/GBZ80Core.v b/GBZ80Core.v
index f4383397978f92fd5539f45dd90b7c40ee1415fd..73785c543af40922f3587a01a228b355f449764c 100644 (file)
--- a/GBZ80Core.v
+++ b/GBZ80Core.v
@@ -52,6 +52,7 @@
 `define INSN_LDH_AC            8'b111x0010     // Either LDH A,(C) or LDH (C),A
 `define INSN_LDx_AHL           8'b001xx010     // LDD/LDI A,(HL) / (HL),A
 `define INSN_ALU8              8'b10xxxxxx     // 10 xxx yyy
+`define INSN_ALU8IMM           8'b11xxx110
 `define INSN_NOP               8'b00000000
 `define INSN_RST               8'b11xxx111
 `define INSN_RET               8'b110x1001     // 1 = RETI, 0 = RET
@@ -68,6 +69,10 @@
 `define INSN_VOP_INTR          8'b11111100     // 0xFC is grabbed by the fetch if there is an interrupt pending.
 `define INSN_DI                        8'b11110011
 `define INSN_EI                        8'b11111011
+`define INSN_INCDEC_HL         8'b0011010x
+`define INSN_INCDEC_reg8       8'b00xxx10x
+`define INSN_LD8M_A            8'b111x0000     // 1111 for ld A, x; 1110 for ld x, A; bit 1 specifies 16m8 or 8m8
+`define INSN_LD16M_A           8'b111x1010     // 1111 for ld A, x; 1110 for ld x, A; bit 1 specifies 16m8 or 8m8
 
 `define INSN_cc_NZ             2'b00
 `define INSN_cc_Z              2'b01
@@ -118,9 +123,10 @@ module GBZ80Core(
        output reg [15:0] busaddress,   /* BUS_* is latched on STATE_FETCH. */
        inout [7:0] busdata,
        output reg buswr, output reg busrd,
-       input irq, input [7:0] jaddr);
+       input irq, input [7:0] jaddr,
+       output reg [1:0] state);
        
-       reg [1:0] state;                                        /* State within this bus cycle (see STATE_*). */
+//     reg [1:0] state;                                        /* State within this bus cycle (see STATE_*). */
        reg [2:0] cycle;                                        /* Cycle for instructions. */
        
        reg [7:0] registers[11:0];