output wire lcdclk, lcdvs, lcdhs,
output wire [2:0] lcdr, lcdg, output wire [1:0] lcdb);
+ /***** Needed prototypes *****/
+ wire [1:0] pixdata;
+
/***** Internal clock that is stable and does not depend on CPU in single/double clock mode *****/
reg clk4 = 0;
always @(posedge clk)
clk4 = ~clk4;
assign lcdclk = clk4;
- /***** Video RAM *****/
- /* Base is 0x8000
- *
- * Tile data from 8000-8FFF or 8800-97FF
- * Background tile maps 9800-9BFF or 9C00-9FFF
- */
- reg [7:0] tiledata [6143:0];
- reg [7:0] bgmap1 [1023:0];
- reg [7:0] bgmap2 [1023:0];
-
/***** LCD control registers *****/
reg [7:0] rLCDC = 8'h91;
reg [7:0] rSTAT = 8'h00;
*
* Modes: 0 -> in hblank and OAM/VRAM available - present 207 clks
* 1 -> in vblank and OAM/VRAM available
- * 2 -> OAM in use - present 83 clks
- * 3 -> OAM/VRAM in use - present 166 clks
- * So, X = 0~165 is HActive,
- * X = 166-372 is HBlank,
- * X = 373-455 is HWhirrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr.
+ * 2 -> OAM in use - present 86 clks
+ * 3 -> OAM/VRAM in use - present 163 clks
+ * So, X = 0~162 is HActive,
+ * X = 163-369 is HBlank,
+ * X = 370-455 is HWhirrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr.
* [02:15:10] <Judge_> LY is updated near the 0 -> 2 transition
* [02:15:38] <Judge_> it seems to be updated internally first before it is visible in the LY register itself
* [02:15:40] <Judge_> some kind of delay
*/
reg [8:0] posx = 9'h000;
reg [7:0] posy = 8'h00;
+
+ wire vraminuse = (posx < 163) && (posy < 144);
+ wire oaminuse = (posx > 369) && (posy < 144);
+
+ wire display = (posx > 2) && (posx < 163) && (posy < 144);
+
wire [1:0] mode = (posy < 144) ?
- ((posx < 166) ? 2'b11 :
- (posx < 373) ? 2'b00 :
- 2'b10)
+ (vraminuse ? 2'b11 :
+ oaminuse ? 2'b10 :
+ 2'b00)
: 2'b01;
+ wire [7:0] vxpos = rSCX + posx - 3;
+ wire [7:0] vypos = rSCY + posy;
+
assign lcdvs = (posy == 153) && (posx == 455);
assign lcdhs = (posx == 455);
- assign lcdr = (posx < 160) && (posy < 144) ? {posy == rLYC ? 3'b111 : 3'b000} : 3'b000;
- assign lcdg = (posx < 160) && (posy < 144) ? {posy < rSCY ? 3'b111 : 3'b000} : 3'b000;
- assign lcdb = (posx < 160) && (posy < 144) ? {2'b11} : 2'b00;
+ assign lcdr = display ? {pixdata[1] ? 3'b111 : 3'b000} : 3'b000;
+ assign lcdg = display ? {pixdata[0] ? 3'b111 : 3'b000} : 3'b000;
+ assign lcdb = display ? {(vypos < 8 || vxpos < 8) ? 2'b11 : 2'b00} : 2'b00;
reg mode00irq = 0, mode01irq = 0, mode10irq = 0, lycirq = 0;
assign lcdcirq = (rSTAT[3] & mode00irq) | (rSTAT[4] & mode01irq) | (rSTAT[5] & mode10irq) | (rSTAT[6] & lycirq);
end
lycirq <= 0;
end
-
end
+
+ /***** Video RAM *****/
+ /* Base is 0x8000
+ *
+ * Tile data from 8000-8FFF or 8800-97FF
+ * Background tile maps 9800-9BFF or 9C00-9FFF
+ */
+ reg [7:0] tiledatahigh [3071:0];
+ reg [7:0] tiledatalow [3071:0];
+ reg [7:0] bgmap1 [1023:0];
+ reg [7:0] bgmap2 [1023:0];
+
+ // Upper five bits are Y coord, lower five bits are X coord
+ // The new tile number is loaded when vxpos[2:0] is 3'b110
+ // The new tile data is loaded when vxpos[2:0] is 3'b111
+ // The new tile data is latched and ready when vxpos[2:0] is 3'b000!
+ wire [9:0] bgmapaddr = {vypos[7:3], vxpos[7:3]};
+ reg [7:0] tileno;
+ wire [10:0] tileaddr = {tileno, vypos[2:0]};
+ reg [7:0] tilehigh, tilelow;
+ assign pixdata = {tilehigh[vxpos[2:0]], tilelow[vxpos[2:0]]};
+
+ wire decode_tiledata = (addr >= 16'h8000) && (addr <= 16'h97FF);
+ wire decode_bgmap1 = (addr >= 16'h9800) && (addr <= 16'h9BFF);
+
+ wire [9:0] bgmapaddr_in = vraminuse ? bgmapaddr : addr[9:0];
+ wire [11:0] tileaddr_in = vraminuse ? tileaddr : addr[12:1];
+
+ always @(negedge clk)
+ if ((vraminuse && ((posx == 1) || (vxpos[2:0] == 3'b110))) || decode_bgmap1) begin
+ tileno <= bgmap1[bgmapaddr_in];
+ if (wr && decode_bgmap1 && ~vraminuse)
+ bgmap1[bgmapaddr_in] <= data;
+ end
+
+ always @(negedge clk)
+ if ((vraminuse && ((posx == 2) || (vxpos[2:0] == 3'b111))) || decode_tiledata) begin
+ tilehigh <= tiledatahigh[tileaddr_in];
+ tilelow <= tiledatalow[tileaddr_in];
+ if (wr && addr[0] && decode_tiledata && ~vraminuse)
+ tiledatahigh[tileaddr_in] <= data;
+ if (wr && ~addr[0] && decode_tiledata && ~vraminuse)
+ tiledatalow[tileaddr_in] <= data;
+ end
/***** Bus interface *****/
assign data = rd ?
- (addr == `ADDR_LCDC) ? rLCDC :
- (addr == `ADDR_STAT) ? {rSTAT[7:3], (rLYC == posy) ? 1'b1 : 1'b0, mode} :
- (addr == `ADDR_SCY) ? rSCY :
- (addr == `ADDR_SCX) ? rSCX :
- (addr == `ADDR_LY) ? posy :
- (addr == `ADDR_LYC) ? rLYC :
- (addr == `ADDR_BGP) ? rBGP :
- (addr == `ADDR_OBP0) ? rOBP0 :
- (addr == `ADDR_OBP1) ? rOBP1 :
- (addr == `ADDR_WY) ? rWY :
- (addr == `ADDR_WX) ? rWX :
- 8'bzzzzzzzz :
+ ((addr == `ADDR_LCDC) ? rLCDC :
+ (addr == `ADDR_STAT) ? {rSTAT[7:3], (rLYC == posy) ? 1'b1 : 1'b0, mode} :
+ (addr == `ADDR_SCY) ? rSCY :
+ (addr == `ADDR_SCX) ? rSCX :
+ (addr == `ADDR_LY) ? posy :
+ (addr == `ADDR_LYC) ? rLYC :
+ (addr == `ADDR_BGP) ? rBGP :
+ (addr == `ADDR_OBP0) ? rOBP0 :
+ (addr == `ADDR_OBP1) ? rOBP1 :
+ (addr == `ADDR_WY) ? rWY :
+ (addr == `ADDR_WX) ? rWX :
+ (decode_tiledata && addr[0]) ? tilehigh :
+ (decode_tiledata && ~addr[0]) ? tilelow :
+ (decode_bgmap1) ? tileno :
+ 8'bzzzzzzzz) :
8'bzzzzzzzz;
always @(negedge clk)
git.joshuawise.com / fpgaboy.git / blobdiff