`define INSN_NOP 8'b00000000
`define INSN_RST 8'b11xxx111
`define INSN_RET 8'b110x1001 // 1 = RETI, 0 = RET
+`define INSN_RETCC 8'b110xx000
`define INSN_CALL 8'b11001101
+`define INSN_CALLCC 8'b110xx100 // Not that call/cc.
`define INSN_JP_imm 8'b11000011
`define INSN_JPCC_imm 8'b110xx010
`define INSN_ALU_A 8'b00xxx111
+`define INSN_JP_HL 8'b11101001
+`define INSN_JR_imm 8'b00011000
+`define INSN_JRCC_imm 8'b001xx000
+`define INSN_INCDEC16 8'b00xxx011
+`define INSN_VOP_INTR 8'b11111100 // 0xFC is grabbed by the fetch if there is an interrupt pending.
+`define INSN_DI 8'b11110011
+`define INSN_EI 8'b11111011
`define INSN_cc_NZ 2'b00
`define INSN_cc_Z 2'b01
module GBZ80Core(
input clk,
- output reg [15:0] busaddress, /* BUS_* is latched on STATE_FETCH. */
+ output reg [15:0] busaddress = 0, /* BUS_* is latched on STATE_FETCH. */
inout [7:0] busdata,
- output reg buswr, output reg busrd);
+ output reg buswr = 0, output reg busrd = 0,
+ input irq, input [7:0] jaddr);
reg [1:0] state = 0; /* State within this bus cycle (see STATE_*). */
reg [2:0] cycle = 0; /* Cycle for instructions. */
reg [7:0] buswdata;
assign busdata = buswr ? buswdata : 8'bzzzzzzzz;
- reg ie = 0;
+ reg ie = 0, iedelay = 0;
initial begin
registers[ 0] <= 0;
newcycle <= 1;
state <= 0;
cycle <= 0;
+ busrd <= 0;
+ buswr <= 0;
+ busaddress <= 0;
+ iedelay <= 0;
end
always @(posedge clk)
end
`STATE_DECODE: begin
if (newcycle) begin
- opcode <= busdata;
+ if (ie && irq)
+ opcode <= `INSN_VOP_INTR;
+ else
+ opcode <= busdata;
rdata <= busdata;
newcycle <= 0;
cycle <= 0;
if (rd) rdata <= busdata;
cycle <= cycle + 1;
end
+ if (iedelay) begin
+ ie <= 1;
+ iedelay <= 0;
+ end
buswr <= 0;
busrd <= 0;
wr <= 0;
end
endcase
end
- `INSN_RET: begin
+ `INSN_RET,`INSN_RETCC: begin
case (cycle)
0: begin
rd <= 1;
address <= {registers[`REG_SPH],registers[`REG_SPL]};
end
- 1: begin
+ 1: begin // SPECIAL CASE: cycle does NOT increase linearly with ret!
+ `EXEC_INC_PC; // cycle 1 is skipped if we are not retcc
+ case (opcode[4:3])
+ `INSN_cc_NZ: if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+ `INSN_cc_Z: if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+ `INSN_cc_NC: if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+ `INSN_cc_C: if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+ endcase
+ rd <= 1;
+ address <= {registers[`REG_SPH],registers[`REG_SPL]};
+ end
+ 2: begin
rd <= 1;
address <= {registers[`REG_SPH],registers[`REG_SPL]} + 1;
end
- 2: begin /* twiddle thumbs */ end
- 3: begin
+ 3: begin /* twiddle thumbs */ end
+ 4: begin
`EXEC_NEWCYCLE;
// do NOT increment PC!
end
endcase
end
- `INSN_CALL: begin
+ `INSN_CALL,`INSN_CALLCC: begin
case (cycle)
0: begin
`EXEC_INC_PC;
end
2: begin
`EXEC_INC_PC;
+ if (!opcode[0]) // i.e., is callcc
+ /* We need to check the condition code to bail out. */
+ case (opcode[4:3])
+ `INSN_cc_NZ: if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+ `INSN_cc_Z: if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+ `INSN_cc_NC: if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+ `INSN_cc_C: if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+ endcase
end
3: begin
address <= {registers[`REG_SPH],registers[`REG_SPL]} - 1;
end
endcase
end
+ `INSN_JP_HL: begin
+ `EXEC_NEWCYCLE;
+ end
+ `INSN_JR_imm,`INSN_JRCC_imm: begin
+ case (cycle)
+ 0: begin
+ `EXEC_INC_PC;
+ `EXEC_NEXTADDR_PCINC;
+ rd <= 1;
+ end
+ 1: begin
+ `EXEC_INC_PC;
+ if (opcode[5]) begin // i.e., JP cc,nn
+ /* We need to check the condition code to bail out. */
+ case (opcode[4:3])
+ `INSN_cc_NZ: if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+ `INSN_cc_Z: if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+ `INSN_cc_NC: if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+ `INSN_cc_C: if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+ endcase
+ end
+ end
+ 2: begin
+ `EXEC_NEWCYCLE;
+ end
+ endcase
+ end
+ `INSN_INCDEC16: begin
+ case (cycle)
+ 0: begin
+ case (opcode[5:4])
+ `INSN_reg16_BC: begin
+ tmp <= registers[`REG_B];
+ tmp2 <= registers[`REG_C];
+ end
+ `INSN_reg16_DE: begin
+ tmp <= registers[`REG_D];
+ tmp2 <= registers[`REG_E];
+ end
+ `INSN_reg16_HL: begin
+ tmp <= registers[`REG_H];
+ tmp2 <= registers[`REG_L];
+ end
+ `INSN_reg16_SP: begin
+ tmp <= registers[`REG_SPH];
+ tmp2 <= registers[`REG_SPL];
+ end
+ endcase
+ end
+ 1: begin
+ `EXEC_INC_PC;
+ `EXEC_NEWCYCLE;
+ end
+ endcase
+ end
+ `INSN_VOP_INTR: begin
+ case (cycle)
+ 0: begin
+ address <= {registers[`REG_SPH],registers[`REG_SPL]} - 1;
+ wdata <= registers[`REG_PCH];
+ wr <= 1;
+ end
+ 1: begin
+ address <= {registers[`REG_SPH],registers[`REG_SPL]} - 2;
+ wdata <= registers[`REG_PCL];
+ wr <= 1;
+ end
+ 2: begin
+ `EXEC_NEWCYCLE;
+ end
+ endcase
+ end
+ `INSN_DI: begin
+ `EXEC_NEWCYCLE;
+ `EXEC_INC_PC;
+ end
+ `INSN_EI: begin
+ `EXEC_NEWCYCLE;
+ `EXEC_INC_PC;
+ end
default:
$stop;
endcase
{registers[`REG_SPH],registers[`REG_SPL]}-2;
endcase
end
- `INSN_RET: begin
+ `INSN_RET,`INSN_RETCC: begin
case (cycle)
- 0: begin /* type F */ end
- 1: registers[`REG_PCL] <= rdata;
- 2: registers[`REG_PCH] <= rdata;
- 3: begin
+ 0: if (opcode[0]) // i.e., not RETCC
+ cycle <= 1; // Skip cycle 1; it gets incremented on the next round.
+ 1: begin /* Nothing need happen here. */ end
+ 2: registers[`REG_PCL] <= rdata;
+ 3: registers[`REG_PCH] <= rdata;
+ 4: begin
{registers[`REG_SPH],registers[`REG_SPL]} <=
{registers[`REG_SPH],registers[`REG_SPL]} + 2;
- if (opcode[4]) /* RETI */
+ if (opcode[4] && opcode[0]) /* RETI */
ie <= 1;
end
endcase
end
- `INSN_CALL: begin
+ `INSN_CALL,`INSN_CALLCC: begin
case (cycle)
0: begin /* type F */ end
1: tmp <= rdata; // tmp contains newpcl
{tmp2,tmp};
endcase
end
+ `INSN_JP_HL: begin
+ {registers[`REG_PCH],registers[`REG_PCL]} <=
+ {registers[`REG_H],registers[`REG_L]};
+ end
+ `INSN_JR_imm,`INSN_JRCC_imm: begin
+ case (cycle)
+ 0: begin /* type F */ end
+ 1: tmp <= rdata;
+ 2: {registers[`REG_PCH],registers[`REG_PCL]} <=
+ {registers[`REG_PCH],registers[`REG_PCL]} +
+ {tmp[7]?8'hFF:8'h00,tmp};
+ endcase
+ end
+ `INSN_INCDEC16: begin
+ case (cycle)
+ 0: {tmp,tmp2} <= {tmp,tmp2} +
+ (opcode[3] ? 16'hFFFF : 16'h0001);
+ 1: begin
+ case (opcode[5:4])
+ `INSN_reg16_BC: begin
+ registers[`REG_B] <= tmp;
+ registers[`REG_C] <= tmp2;
+ end
+ `INSN_reg16_DE: begin
+ registers[`REG_D] <= tmp;
+ registers[`REG_E] <= tmp2;
+ end
+ `INSN_reg16_HL: begin
+ registers[`REG_H] <= tmp;
+ registers[`REG_L] <= tmp2;
+ end
+ `INSN_reg16_SP: begin
+ registers[`REG_SPH] <= tmp;
+ registers[`REG_SPL] <= tmp2;
+ end
+ endcase
+ end
+ endcase
+ end
+ `INSN_VOP_INTR: begin
+ case (cycle)
+ 0: begin end
+ 1: {registers[`REG_SPH],registers[`REG_SPL]}
+ <= {registers[`REG_SPH],registers[`REG_SPL]} - 2;
+ 2: begin
+ ie <= 0;
+ {registers[`REG_PCH],registers[`REG_PCL]} <=
+ {8'b0,jaddr};
+ end
+ endcase
+ end
+ `INSN_DI: ie <= 0;
+ `INSN_EI: iedelay <= 1;
default:
$stop;
endcase
git.joshuawise.com / fpgaboy.git / blobdiff