JP

[fpgaboy.git] / GBZ80Core.v

`define REG_A 0
`define REG_B 1
`define REG_C 2
`define REG_D 3
`define REG_E 4
`define REG_F 5
`define REG_H 6
`define REG_L 7
`define REG_SPH 8
`define REG_SPL 9
`define REG_PCH 10
`define REG_PCL 11

`define FLAG_Z 8'b10000000
`define FLAG_N 8'b01000000
`define FLAG_H 8'b00100000
`define FLAG_C 8'b00010000

`define STATE_FETCH			2'h0
`define STATE_DECODE			2'h1
`define STATE_EXECUTE		2'h2
`define STATE_WRITEBACK		2'h3

`define INSN_LD_reg_imm8	8'b00xxx110
`define INSN_HALT				8'b01110110
`define INSN_LD_HL_reg		8'b01110xxx
`define INSN_LD_reg_HL		8'b01xxx110
`define INSN_LD_reg_reg		8'b01xxxxxx
`define INSN_LD_reg_imm16	8'b00xx0001
`define INSN_LD_SP_HL		8'b11111001
`define INSN_PUSH_reg		8'b11xx0101
`define INSN_POP_reg			8'b11xx0001
`define INSN_LDH_AC			8'b111x0010	// Either LDH A,(C) or LDH (C),A
`define INSN_LDx_AHL			8'b001xx010	// LDD/LDI A,(HL) / (HL),A
`define INSN_ALU8				8'b10xxxxxx	// 10 xxx yyy
`define INSN_NOP				8'b00000000
`define INSN_RST				8'b11xxx111
`define INSN_RET				8'b110x1001	// 1 = RETI, 0 = RET
`define INSN_CALL				8'b11001101
`define INSN_JP_imm			8'b11000011
`define INSN_JPCC_imm		8'b110xx010

`define INSN_cc_NZ			2'b00
`define INSN_cc_Z				2'b01
`define INSN_cc_NC			2'b10
`define INSN_cc_C				2'b11

`define INSN_reg_A		3'b111
`define INSN_reg_B		3'b000
`define INSN_reg_C		3'b001
`define INSN_reg_D		3'b010
`define INSN_reg_E		3'b011
`define INSN_reg_H		3'b100
`define INSN_reg_L		3'b101
`define INSN_reg_dHL	3'b110
`define INSN_reg16_BC	2'b00
`define INSN_reg16_DE	2'b01
`define INSN_reg16_HL	2'b10
`define INSN_reg16_SP	2'b11
`define INSN_stack_AF	2'b11
`define INSN_stack_BC	2'b00
`define INSN_stack_DE	2'b01
`define INSN_stack_HL	2'b10
`define INSN_alu_ADD		3'b000
`define INSN_alu_ADC		3'b001
`define INSN_alu_SUB		3'b010
`define INSN_alu_SBC		3'b011
`define INSN_alu_AND		3'b100
`define INSN_alu_XOR		3'b101
`define INSN_alu_OR		3'b110
`define INSN_alu_CP		3'b111		// Oh lawd, is dat some CP?

module GBZ80Core(
	input clk,
	output reg [15:0] busaddress,	/* BUS_* is latched on STATE_FETCH. */
	inout [7:0] busdata,
	output reg buswr, output reg busrd);
	
	reg [1:0] state = 0;					/* State within this bus cycle (see STATE_*). */
	reg [2:0] cycle = 0;					/* Cycle for instructions. */
	
	reg [7:0] registers[11:0];
	
	reg [15:0] address;				/* Address for the next bus operation. */
	
	reg [7:0] opcode;				/* Opcode from the current machine cycle. */
	
	reg [7:0] rdata, wdata;		/* Read data from this bus cycle, or write data for the next. */
	reg rd = 1, wr = 0, newcycle = 1;
	
	reg [7:0] tmp, tmp2;			/* Generic temporary regs. */
	
	reg [7:0] buswdata;
	assign busdata = buswr ? buswdata : 8'bzzzzzzzz;
	
	reg ie = 0;
	
	initial begin
		registers[ 0] <= 0;
		registers[ 1] <= 0;
		registers[ 2] <= 0;
		registers[ 3] <= 0;
		registers[ 4] <= 0;
		registers[ 5] <= 0;
		registers[ 6] <= 0;
		registers[ 7] <= 0;
		registers[ 8] <= 0;
		registers[ 9] <= 0;
		registers[10] <= 0;
		registers[11] <= 0;
		ie <= 0;
		rd <= 1;
		wr <= 0;
		newcycle <= 1;
		state <= 0;
		cycle <= 0;
	end

	always @(posedge clk)
		case (state)
		`STATE_FETCH: begin
			if (newcycle) begin
				busaddress <= {registers[`REG_PCH], registers[`REG_PCL]};
				buswr <= 0;
				busrd <= 1;
			end else begin
				busaddress <= address;
				buswr <= wr;
				busrd <= rd;
				if (wr)
					buswdata <= wdata;
			end
			state <= `STATE_DECODE;
		end
		`STATE_DECODE: begin
			if (newcycle) begin
				opcode <= busdata;
				rdata <= busdata;
				newcycle <= 0;
				cycle <= 0;
			end else begin
				if (rd) rdata <= busdata;
				cycle <= cycle + 1;
			end
			buswr <= 0;
			busrd <= 0;
			wr <= 0;
			rd <= 0;
			address <= 16'bxxxxxxxxxxxxxxxx;	// Make it obvious if something of type has happened.
			wdata <= 8'bxxxxxxxx;
			state <= `STATE_EXECUTE;
		end
		`STATE_EXECUTE: begin
`define EXEC_INC_PC \
	{registers[`REG_PCH], registers[`REG_PCL]} <= {registers[`REG_PCH], registers[`REG_PCL]} + 1
`define EXEC_NEXTADDR_PCINC \
	address <= {registers[`REG_PCH], registers[`REG_PCL]} + 1
`define EXEC_NEWCYCLE \
	newcycle <= 1; rd <= 1; wr <= 0
			casex (opcode)
			`INSN_LD_reg_imm8: begin
				case (cycle)
				0:	begin
						`EXEC_INC_PC;
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				1:	begin
						`EXEC_INC_PC;
						if (opcode[5:3] == `INSN_reg_dHL) begin
							address <= {registers[`REG_H], registers[`REG_L]};
							wdata <= rdata;
							rd <= 0;
							wr <= 1;
						end else begin
							`EXEC_NEWCYCLE;
						end
					end
				2:	begin
						`EXEC_NEWCYCLE;
					end
				endcase
			end
			`INSN_HALT: begin
				`EXEC_NEWCYCLE;
				/* XXX Interrupts needed for HALT. */
			end
			`INSN_LD_HL_reg: begin
				case (cycle)
				0:	begin
						case (opcode[2:0])
						`INSN_reg_A:	wdata <= registers[`REG_A];
						`INSN_reg_B:	wdata <= registers[`REG_B];
						`INSN_reg_C:	wdata <= registers[`REG_C];
						`INSN_reg_D:	wdata <= registers[`REG_D];
						`INSN_reg_E:	wdata <= registers[`REG_E];
						`INSN_reg_H:	wdata <= registers[`REG_H];
						`INSN_reg_L:	wdata <= registers[`REG_L];
						endcase
						address <= {registers[`REG_H], registers[`REG_L]};
						wr <= 1; rd <= 0;
					end
				1:	begin
						`EXEC_INC_PC;
						`EXEC_NEWCYCLE;
					end
				endcase
			end
			`INSN_LD_reg_HL: begin
				case(cycle)
				0:	begin
						address <= {registers[`REG_H], registers[`REG_L]};
						rd <= 1;
					end
				1:	begin
						tmp <= rdata;
						`EXEC_INC_PC;
						`EXEC_NEWCYCLE;
					end
				endcase
			end
			`INSN_LD_reg_reg: begin
				`EXEC_INC_PC;
				`EXEC_NEWCYCLE;
				case (opcode[2:0])
				`INSN_reg_A:	tmp <= registers[`REG_A];
				`INSN_reg_B:	tmp <= registers[`REG_B];
				`INSN_reg_C:	tmp <= registers[`REG_C];
				`INSN_reg_D:	tmp <= registers[`REG_D];
				`INSN_reg_E:	tmp <= registers[`REG_E];
				`INSN_reg_H:	tmp <= registers[`REG_H];
				`INSN_reg_L:	tmp <= registers[`REG_L];
				endcase
			end
			`INSN_LD_reg_imm16: begin
				`EXEC_INC_PC;
				case (cycle)
				0:	begin
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				1:	begin
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				2: begin `EXEC_NEWCYCLE; end
				endcase
			end
			`INSN_LD_SP_HL: begin
				case (cycle)
				0:	begin
						tmp <= registers[`REG_H];
					end
				1:	begin
						`EXEC_NEWCYCLE;
						`EXEC_INC_PC;
						tmp <= registers[`REG_L];
					end
				endcase
			end
			`INSN_PUSH_reg: begin	/* PUSH is 16 cycles! */
				case (cycle)
				0:	begin
						wr <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
						case (opcode[5:4])
						`INSN_stack_AF:	wdata <= registers[`REG_A];
						`INSN_stack_BC:	wdata <= registers[`REG_B];
						`INSN_stack_DE:	wdata <= registers[`REG_D];
						`INSN_stack_HL:	wdata <= registers[`REG_H];
						endcase
					end
				1:	begin
						wr <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
						case (opcode[5:4])
						`INSN_stack_AF:	wdata <= registers[`REG_F];
						`INSN_stack_BC:	wdata <= registers[`REG_C];
						`INSN_stack_DE:	wdata <= registers[`REG_E];
						`INSN_stack_HL:	wdata <= registers[`REG_L];
						endcase
					end
				2:	begin /* TWIDDLE OUR FUCKING THUMBS! */ end
				3:	begin
						`EXEC_NEWCYCLE;
						`EXEC_INC_PC;
					end
				endcase
			end
			`INSN_POP_reg: begin	/* POP is 12 cycles! */
				case (cycle)
				0:	begin
						rd <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]};
					end
				1:	begin
						rd <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]};
					end
				2:	begin
						`EXEC_NEWCYCLE;
						`EXEC_INC_PC;
					end
				endcase
			end
			`INSN_LDH_AC: begin
				case (cycle)
				0:	begin
						address <= {8'hFF,registers[`REG_C]};
						if (opcode[4]) begin	// LD A,(C)
							rd <= 1;
						end else begin
							wr <= 1;
							wdata <= registers[`REG_A];
						end
					end
				1:	begin
						`EXEC_NEWCYCLE;
						`EXEC_INC_PC;
					end
				endcase
			end
			`INSN_LDx_AHL: begin
				case (cycle)
				0:	begin
						address <= {registers[`REG_H],registers[`REG_L]};
						if (opcode[3]) begin	// LDx A, (HL)
							rd <= 1;
						end else begin
							wr <= 1;
							wdata <= registers[`REG_A];
						end
					end
				1:	begin
						`EXEC_NEWCYCLE;
						`EXEC_INC_PC;
					end
				endcase
			end
			`INSN_ALU8: begin
				if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
					// fffffffff fuck your shit, read from (HL) :(
					rd <= 1;
					address <= {registers[`REG_H], registers[`REG_L]};
				end else begin
					`EXEC_NEWCYCLE;
					`EXEC_INC_PC;
					case (opcode[2:0])
					`INSN_reg_A:	tmp <= registers[`REG_A];
					`INSN_reg_B:	tmp <= registers[`REG_B];
					`INSN_reg_C:	tmp <= registers[`REG_C];
					`INSN_reg_D:	tmp <= registers[`REG_D];
					`INSN_reg_E:	tmp <= registers[`REG_E];
					`INSN_reg_H:	tmp <= registers[`REG_H];
					`INSN_reg_L:	tmp <= registers[`REG_L];
					`INSN_reg_dHL:	tmp <= rdata;
					endcase
				end
			end
			`INSN_NOP: begin
				`EXEC_NEWCYCLE;
				`EXEC_INC_PC;
			end
			`INSN_RST: begin
				case (cycle)
				0:	begin
						`EXEC_INC_PC;		// This goes FIRST in RST
					end
				1:	begin
						wr <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
						wdata <= registers[`REG_PCH];
					end
				2:	begin
						wr <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]}-2;
						wdata <= registers[`REG_PCL];
					end
				3:	begin
						`EXEC_NEWCYCLE;
						{registers[`REG_PCH],registers[`REG_PCL]} <=
							{10'b0,opcode[5:3],3'b0};
					end
				endcase
			end
			`INSN_RET: begin
				case (cycle)
				0:	begin
						rd <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]};
					end
				1:	begin
						rd <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]} + 1;
					end
				2:	begin /* twiddle thumbs */ end
				3:	begin
						`EXEC_NEWCYCLE;
						// do NOT increment PC!
					end
				endcase
			end
			`INSN_CALL: begin
				case (cycle)
				0:	begin
						`EXEC_INC_PC;
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				1:	begin
						`EXEC_INC_PC;
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				2:	begin
						`EXEC_INC_PC;
					end
				3:	begin
						address <= {registers[`REG_SPH],registers[`REG_SPL]} - 1;
						wdata <= registers[`REG_PCH];
						wr <= 1;
					end
				4:	begin
						address <= {registers[`REG_SPH],registers[`REG_SPL]} - 2;
						wdata <= registers[`REG_PCL];
						wr <= 1;
					end
				5:	begin
						`EXEC_NEWCYCLE;	/* do NOT increment the PC */
					end
				endcase
			end
			`INSN_JP_imm,`INSN_JPCC_imm: begin
				case (cycle)
				0:	begin
						`EXEC_INC_PC;
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				1:	begin
						`EXEC_INC_PC;
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				2:	begin
						if (!opcode[0]) begin	// i.e., JP cc,nn
							/* We need to check the condition code to bail out. */
							case (opcode[4:3])
							`INSN_cc_NZ:	if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_Z:		if (!registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_NC:	if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_C:		if (!registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
							endcase
						end
					end
				3:	begin
						`EXEC_NEWCYCLE;
					end
				endcase
			end
			default:
				$stop;
			endcase
			state <= `STATE_WRITEBACK;
		end
		`STATE_WRITEBACK: begin
			casex (opcode)
			`INSN_LD_reg_imm8:
				case (cycle)
				0:	begin end
				1:	case (opcode[5:3])
					`INSN_reg_A:	begin registers[`REG_A] <= rdata; end
					`INSN_reg_B:	begin registers[`REG_B] <= rdata; end
					`INSN_reg_C:	begin registers[`REG_C] <= rdata; end
					`INSN_reg_D:	begin registers[`REG_D] <= rdata; end
					`INSN_reg_E:	begin registers[`REG_E] <= rdata; end
					`INSN_reg_H:	begin registers[`REG_H] <= rdata; end
					`INSN_reg_L:	begin registers[`REG_L] <= rdata; end
					`INSN_reg_dHL:	begin /* Go off to cycle 2 */ end
					endcase
				2:	begin end
				endcase
			`INSN_HALT: begin
				/* Nothing needs happen here. */
				/* XXX Interrupts needed for HALT. */
			end
			`INSN_LD_HL_reg: begin
				/* Nothing of interest here */
			end
			`INSN_LD_reg_HL: begin
				case (cycle)
				0:	begin end
				1:	begin
						case (opcode[5:3])
						`INSN_reg_A:	registers[`REG_A] <= tmp;
						`INSN_reg_B:	registers[`REG_B] <= tmp;
						`INSN_reg_C:	registers[`REG_C] <= tmp;
						`INSN_reg_D:	registers[`REG_D] <= tmp;
						`INSN_reg_E:	registers[`REG_E] <= tmp;
						`INSN_reg_H:	registers[`REG_H] <= tmp;
						`INSN_reg_L:	registers[`REG_L] <= tmp;
						endcase
					end
				endcase
			end
			`INSN_LD_reg_reg: begin
				case (opcode[5:3])
				`INSN_reg_A:	registers[`REG_A] <= tmp;
				`INSN_reg_B:	registers[`REG_B] <= tmp;
				`INSN_reg_C:	registers[`REG_C] <= tmp;
				`INSN_reg_D:	registers[`REG_D] <= tmp;
				`INSN_reg_E:	registers[`REG_E] <= tmp;
				`INSN_reg_H:	registers[`REG_H] <= tmp;
				`INSN_reg_L:	registers[`REG_L] <= tmp;
				endcase
			end
			`INSN_LD_reg_imm16: begin
				case (cycle)
				0:	begin /* */ end
				1:	begin
						case (opcode[5:4])
						`INSN_reg16_BC:	registers[`REG_C] <= rdata;
						`INSN_reg16_DE:	registers[`REG_E] <= rdata;
						`INSN_reg16_HL:	registers[`REG_L] <= rdata;
						`INSN_reg16_SP:	registers[`REG_SPL] <= rdata;
						endcase
					end
				2: begin
						case (opcode[5:4])
						`INSN_reg16_BC:	registers[`REG_B] <= rdata;
						`INSN_reg16_DE:	registers[`REG_D] <= rdata;
						`INSN_reg16_HL:	registers[`REG_H] <= rdata;
						`INSN_reg16_SP:	registers[`REG_SPH] <= rdata;
						endcase
					end
				endcase
			end
			`INSN_LD_SP_HL: begin
				case (cycle)
				0:	registers[`REG_SPH] <= tmp;
				1: registers[`REG_SPL] <= tmp;
				endcase
			end
			`INSN_PUSH_reg: begin	/* PUSH is 16 cycles! */
				case (cycle)
				0:	{registers[`REG_SPH],registers[`REG_SPL]} <=
						{registers[`REG_SPH],registers[`REG_SPL]} - 1;
				1:	{registers[`REG_SPH],registers[`REG_SPL]} <=
						{registers[`REG_SPH],registers[`REG_SPL]} - 1;
				2:	begin /* type F */ end
				3:	begin /* type F */ end
				endcase
			end
			`INSN_POP_reg: begin	/* POP is 12 cycles! */
				case (cycle)
				0:	{registers[`REG_SPH],registers[`REG_SPL]} <=
						{registers[`REG_SPH],registers[`REG_SPL]} + 1;
				1:	begin
						case (opcode[5:4])
						`INSN_stack_AF:	registers[`REG_F] <= rdata;
						`INSN_stack_BC:	registers[`REG_C] <= rdata;
						`INSN_stack_DE:	registers[`REG_E] <= rdata;
						`INSN_stack_HL:	registers[`REG_L] <= rdata;
						endcase
						{registers[`REG_SPH],registers[`REG_SPL]} <=
							{registers[`REG_SPH],registers[`REG_SPL]} + 1;
					end
				2:	begin
						case (opcode[5:4])
						`INSN_stack_AF:	registers[`REG_A] <= rdata;
						`INSN_stack_BC:	registers[`REG_B] <= rdata;
						`INSN_stack_DE:	registers[`REG_D] <= rdata;
						`INSN_stack_HL:	registers[`REG_H] <= rdata;
						endcase
					end
				endcase
			end
			`INSN_LDH_AC: begin
				case (cycle)
				0:	begin /* Type F */ end
				1:	if (opcode[4])
						registers[`REG_A] <= rdata;
				endcase
			end
			`INSN_LDx_AHL: begin
				case (cycle)
				0:	begin /* Type F */ end
				1:	begin
						if (opcode[3])
							registers[`REG_A] <= rdata;
						{registers[`REG_H],registers[`REG_L]} <=
							opcode[4] ? // if set, LDD, else LDI
							({registers[`REG_H],registers[`REG_L]} - 1) :
							({registers[`REG_H],registers[`REG_L]} + 1);
					end
				endcase
			end
			`INSN_ALU8: begin
				if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
					/* Sit on our asses. */
				end else begin		/* Actually do the computation! */
					case (opcode[5:3])
					`INSN_alu_ADD: begin
						registers[`REG_A] <=
							registers[`REG_A] + tmp;
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] + tmp) == 0) ? 1'b1 : 1'b0,
							  /* N */ 1'b0,
							  /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
							  /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
							  registers[`REG_F][3:0]
							};
					end
					`INSN_alu_ADC: begin
						registers[`REG_A] <=
							registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]};
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]}) == 0) ? 1'b1 : 1'b0,
							  /* N */ 1'b0,
							  /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]} + {4'b0,registers[`REG_F][4]}) >> 4 == 1) ? 1'b1 : 1'b0,
							  /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp} + {8'b0,registers[`REG_F][4]}) >> 8 == 1) ? 1'b1 : 1'b0,
							  registers[`REG_F][3:0]
							};
					end
					`INSN_alu_AND: begin
						registers[`REG_A] <=
							registers[`REG_A] & tmp;
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] & tmp) == 0) ? 1'b1 : 1'b0,
							  3'b010,
							  registers[`REG_F][3:0]
							};
					end
					`INSN_alu_OR: begin
						registers[`REG_A] <=
							registers[`REG_A] | tmp;
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] | tmp) == 0) ? 1'b1 : 1'b0,
							  3'b000,
							  registers[`REG_F][3:0]
							};
					end
					`INSN_alu_XOR: begin
						registers[`REG_A] <=
							registers[`REG_A] ^ tmp;
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] ^ tmp) == 0) ? 1'b1 : 1'b0,
							  3'b000,
							  registers[`REG_F][3:0]
							};
					end
					default:
						$stop;
					endcase
				end
			end
			`INSN_NOP: begin /* NOP! */ end
			`INSN_RST: begin
				case (cycle)
				0:	begin /* type F */ end
				1:	begin /* type F */ end
				2:	begin /* type F */ end
				3:	{registers[`REG_SPH],registers[`REG_SPL]} <=
						{registers[`REG_SPH],registers[`REG_SPL]}-2;
				endcase
			end
			`INSN_RET: begin
				case (cycle)
				0:	begin /* type F */ end
				1:	registers[`REG_PCL] <= rdata;
				2:	registers[`REG_PCH] <= rdata;
				3:	begin
						{registers[`REG_SPH],registers[`REG_SPL]} <=
							{registers[`REG_SPH],registers[`REG_SPL]} + 2;
						if (opcode[4])	/* RETI */
							ie <= 1;
					end
				endcase
			end
			`INSN_CALL: begin
				case (cycle)
				0:	begin /* type F */ end
				1:	tmp <= rdata;	// tmp contains newpcl
				2:	tmp2 <= rdata;	// tmp2 contains newpch
				3:	begin /* type F */ end
				4:	registers[`REG_PCH] <= tmp2;
				5: begin
						{registers[`REG_SPH],registers[`REG_SPL]} <=
							{registers[`REG_SPH],registers[`REG_SPL]} - 2;
						registers[`REG_PCL] <= tmp;
					end
				endcase
			end
			`INSN_JP_imm,`INSN_JPCC_imm: begin
				case (cycle)
				0:	begin /* type F */ end
				1:	tmp <= rdata;	// tmp contains newpcl
				2:	tmp2 <= rdata;	// tmp2 contains newpch
				3:	{registers[`REG_PCH],registers[`REG_PCL]} <=
						{tmp2,tmp};
				endcase
			end
			default:
				$stop;
			endcase
			state <= `STATE_FETCH;
		end
		endcase
endmodule