Joshua Wise's Git repositories - fpgaboy.git/blame_incremental

... / ...

Commit	Line	Data
	1	////////////////////////////////////////////////////////////////////////////////
	2	// Copyright (c) 1995-2008 Xilinx, Inc. All rights reserved.
	3	////////////////////////////////////////////////////////////////////////////////
	4	// ____ ____
	5	// / /\/ /
	6	// /___/ \ / Vendor: Xilinx
	7	// \ \ \/ Version : 10.1
	8	// \ \ Application : xaw2verilog
	9	// / / Filename : CPUDCM.v
	10	// /___/ /\ Timestamp : 03/31/2008 23:51:44
	11	// \ \ / \
	12	// \___\/\___\
	13	//
	14	//Command: xaw2verilog -intstyle /home/joshua/projects/fpga/FPGABoy/CPUDCM.xaw -st CPUDCM.v
	15	//Design Name: CPUDCM
	16	//Device: xc3s500e-5fg320
	17	//
	18	// Module CPUDCM
	19	// Generated by Xilinx Architecture Wizard
	20	// Written for synthesis tool: XST
	21	// Period Jitter (unit interval) for block DCM_SP_INST = 0.04 UI
	22	// Period Jitter (Peak-to-Peak) for block DCM_SP_INST = 4.90 ns
	23	`timescale 1ns / 1ps
	24
	25	module CPUDCM(CLKIN_IN,
	26	CLKFX_OUT,
	27	CLKIN_IBUFG_OUT,
	28	LOCKED_OUT);
	29
	30	input CLKIN_IN;
	31	output CLKFX_OUT;
	32	output CLKIN_IBUFG_OUT;
	33	output LOCKED_OUT;
	34
	35	wire CLKFX_BUF;
	36	wire CLKIN_IBUFG;
	37	wire GND_BIT;
	38
	39	assign GND_BIT = 0;
	40	assign CLKIN_IBUFG_OUT = CLKIN_IBUFG;
	41	BUFG CLKFX_BUFG_INST (.I(CLKFX_BUF),
	42	.O(CLKFX_OUT));
	43	IBUFG CLKIN_IBUFG_INST (.I(CLKIN_IN),
	44	.O(CLKIN_IBUFG));
	45	DCM_SP DCM_SP_INST (.CLKFB(GND_BIT),
	46	.CLKIN(CLKIN_IBUFG),
	47	.DSSEN(GND_BIT),
	48	.PSCLK(GND_BIT),
	49	.PSEN(GND_BIT),
	50	.PSINCDEC(GND_BIT),
	51	.RST(GND_BIT),
	52	.CLKDV(),
	53	.CLKFX(CLKFX_BUF),
	54	.CLKFX180(),
	55	.CLK0(),
	56	.CLK2X(),
	57	.CLK2X180(),
	58	.CLK90(),
	59	.CLK180(),
	60	.CLK270(),
	61	.LOCKED(LOCKED_OUT),
	62	.PSDONE(),
	63	.STATUS());
	64	defparam DCM_SP_INST.CLK_FEEDBACK = "NONE";
	65	defparam DCM_SP_INST.CLKDV_DIVIDE = 2.0;
	66	defparam DCM_SP_INST.CLKFX_DIVIDE = 25;
	67	defparam DCM_SP_INST.CLKFX_MULTIPLY = 4;
	68	defparam DCM_SP_INST.CLKIN_DIVIDE_BY_2 = "FALSE";
	69	defparam DCM_SP_INST.CLKIN_PERIOD = 20.000;
	70	defparam DCM_SP_INST.CLKOUT_PHASE_SHIFT = "NONE";
	71	defparam DCM_SP_INST.DESKEW_ADJUST = "SYSTEM_SYNCHRONOUS";
	72	defparam DCM_SP_INST.DFS_FREQUENCY_MODE = "LOW";
	73	defparam DCM_SP_INST.DLL_FREQUENCY_MODE = "LOW";
	74	defparam DCM_SP_INST.DUTY_CYCLE_CORRECTION = "TRUE";
	75	defparam DCM_SP_INST.FACTORY_JF = 16'hC080;
	76	defparam DCM_SP_INST.PHASE_SHIFT = 0;
	77	defparam DCM_SP_INST.STARTUP_WAIT = "FALSE";
	78	endmodule