Ethernet ROM start

[fpgaboy.git] / Ethernet.v

`define ADDR_ETH_STATUS 16'hFF68
`define ADDR_ETH 16'hFF69

module Ethernet (
	input clk,
	input wr,
	input rd,
	input [15:0] addr,
	inout [7:0] data,
	input ethclk, rxclk,
	input rxp, rxm,
	output txp, txm);

	wire [10:0] txhwaddr;
	wire [7:0] txhwdata;
	wire txbusy;

	reg [10:0] txlength = 0;
	reg [10:0] txwraddr = 0;
	reg [1:0] txstate = 0;
	reg txstart = 0;
	
	reg [15:0] addrlatch;
	reg rdlatch;
	
	wire decode = (addrlatch == `ADDR_ETH_STATUS) || (addrlatch == `ADDR_ETH);
	reg [7:0] odata;
	assign data = (decode && rdlatch) ? odata : 8'bzzzzzzzz;

	EnetTX tx(
		.clk20(ethclk),
		.Ethernet_TDp(txp),
		.Ethernet_TDm(txm),
		.busy(txbusy),
		.length(txlength),
		.rdaddress(txhwaddr),
		.start(txstart),
		.indata(txhwdata));
	
	EthModRam txram(
		.wdata(data),
		.waddr(txwraddr),
		.wr(wr && state == 2'b10 && addr == `ADDR_ETH),
		.wrclk(clk),
		.rdata(txhwdata),
		.raddr(txhwaddr),
		.rdclk(ethclk));
	
	wire [10:0] rxphyaddr;
	wire [7:0] rxphydata;
	wire rxphywr;
	wire rxpktrdy;
	reg rxclear = 0;
	reg [1:0] rxstate = 0;
	wire [10:0] rxlength;
	reg [10:0] rxcurlength;
	
	reg [10:0] rxcoreaddr = 0;
	wire [7:0] rxcoredata;
	
	EnetRX rx(
		.rxclk(rxclk),
		.manchester_data_in(~rxp),
		.wr(rxphywr),
		.oaddr(rxphyaddr),
		.odata(rxphydata),
		.pktrdy(rxpktrdy),
		.olength(rxlength),
		.pktclear(rxclear));
	
	EthModRam rxram(
		.wdata(rxphydata),
		.waddr(rxphyaddr),
		.wr(rxphywr),
		.wrclk(rxclk),
		.rdata(rxcoredata),
		.raddr(rxcoreaddr),
		.rdclk(clk));

	always @ (posedge clk) begin
		addrlatch <= addr;
		rdlatch <= rd;
		
		if (rd && addr == `ADDR_ETH_STATUS)
			odata <= {state,4'b0,rxpktrdy,txbusy};
		else if (wr && addr == `ADDR_ETH_STATUS) begin		/* Reset the state machines. */
			rxstate <= 2'b00;
			txstate <= 2'b00;
		end else if (rd && addr == `ADDR_ETH) begin
			case (rxstate)
			2'b00: begin
				if (!rxpktrdy)
					rxcurlength <= 0;
				else
					rxcurlength <= rxlength;
				odata <= rxpktrdy ? {5'b0,rxlength[10:8]} : 8'b0;
				rxstate <= 2'b01;
			end
			2'b01: begin
				rxstate <= (rxcurlength == 0) ? 2'b00 : 2'b10;
				odata <= rxcurlength[7:0];
				rxcoreaddr <= 0;
			end
			2'b10: begin
				odata <= rxcoredata;
				if (rxcoreaddr == (rxcurlength - 1)) begin
					rxstate <= 2'b11;
					rxclear <= 1;
				end else
					rxcoreaddr <= rxcoreaddr + 1;
			end
			endcase
		end else if (rxstate == 2'b11 || rxclear) begin
			rxstate <= 2'b00;
			rxclear <= 0;
		end else if (wr && addr == `ADDR_ETH) begin
			case(txstate)
			2'b00: begin
				txlength[10:8] <= data[2:0];
				txstate <= 2'b01;
			end
			2'b01: begin
				txlength[7:0] <= data[7:0];
				txstate <= 2'b10;
				txwraddr <= 0;
			end
			2'b10:
				if(txwraddr == (txlength - 1)) begin
					txstate <= 2'b11;
					txstart <= 1'b1;
				end else
					txwraddr <= txwraddr + 1;
			endcase
		end else if (txstate == 2'b11) begin
			txstart <= 1'b0;
			txstate <= 2'b00;
		end
	end

endmodule

module EthModRam (
	input [7:0] wdata,
	input [10:0] waddr,
	input [10:0] raddr,
	input wr,
	input wrclk,
	input rdclk,
	output reg [7:0] rdata);

	reg [7:0] mem [1600:0];

	always @(posedge wrclk) begin
		if(wr)
			mem[waddr] <= wdata;
	end

	always @(posedge rdclk)
		rdata <= mem[raddr];
endmodule

module EnetTX(input clk20, output reg Ethernet_TDp, output reg Ethernet_TDm, output wire busy, input start, input [11:0] length, output wire [11:0] rdaddress, input [7:0] indata);
	reg StartSending; always @(posedge clk20) StartSending<=start;
	reg [11:0] curlen = 0; always @(posedge clk20) if (start) curlen <= length + 8;
	
	reg [11:0] internaladdr;
	assign rdaddress = internaladdr - 8;
	wire [7:0] pkt_data = (internaladdr < 7) ? 8'h55 :
				(internaladdr == 7) ? 8'hD5 :
				indata;

	//////////////////////////////////////////////////////////////////////
	// and finally the 10BASE-T's magic
	reg [3:0] ShiftCount;
	reg SendingPacket;
	always @(posedge clk20) if(StartSending) SendingPacket<=1; else if(ShiftCount==14 && internaladdr==(curlen + 4)) SendingPacket<=0;
	always @(posedge clk20) ShiftCount <= SendingPacket ? ShiftCount+1 : 15;
	wire readram = (ShiftCount==15);
	always @(posedge clk20) if(ShiftCount==15) internaladdr <= SendingPacket ? internaladdr+1 : 0;
	reg [7:0] ShiftData; always @(posedge clk20) if(ShiftCount[0]) ShiftData <= readram ? pkt_data : {1'b0, ShiftData[7:1]};

	// generate the CRC32
	reg [31:0] CRC;
	reg CRCflush; always @(posedge clk20) if(CRCflush) CRCflush <= SendingPacket; else if(readram) CRCflush <= (internaladdr==curlen);
	reg CRCinit; always @(posedge clk20) if(readram) CRCinit <= (internaladdr==7);
	wire CRCinput = CRCflush ? 0 : (ShiftData[0] ^ CRC[31]);
	always @(posedge clk20) if(ShiftCount[0]) CRC <= CRCinit ? ~0 : ({CRC[30:0],1'b0} ^ ({32{CRCinput}} & 32'h04C11DB7));

	// generate the NLP
	reg [17:0] LinkPulseCount; always @(posedge clk20) LinkPulseCount <= SendingPacket ? 0 : LinkPulseCount+1;
	reg LinkPulse; always @(posedge clk20) LinkPulse <= &LinkPulseCount[17:1];

	// TP_IDL, shift-register and manchester encoder
	reg SendingPacketData; always @(posedge clk20) SendingPacketData <= SendingPacket;
	assign busy = SendingPacketData;
	reg [2:0] idlecount; always @(posedge clk20) if(SendingPacketData) idlecount<=0; else if(~&idlecount) idlecount<=idlecount+1;
	wire dataout = CRCflush ? ~CRC[31] : ShiftData[0];
	reg qo; always @(posedge clk20) qo <= SendingPacketData ? ~dataout^ShiftCount[0] : 1;
	reg qoe; always @(posedge clk20) qoe <= SendingPacketData | LinkPulse | (idlecount<6);
	always @(posedge clk20) Ethernet_TDp <= (qoe ? qo : 1'b0);
	always @(posedge clk20) Ethernet_TDm <= (qoe ? ~qo : 1'b0);
endmodule

module EnetRX(
	input rxclk,
	input manchester_data_in,
	output reg wr,
	output reg [10:0] oaddr,
	output reg [7:0] odata,
	output reg pktrdy = 0,
	output reg [10:0] olength = 0,
	input pktclear);
	
	reg [2:0] in_data;
	always @(posedge rxclk) in_data <= {in_data[1:0], manchester_data_in};
	
	reg [7:0] data;
	
	reg [1:0] cnt;
	always @(posedge rxclk) if(|cnt || (in_data[2] ^ in_data[1])) cnt<=cnt+1;
	
	reg new_bit_avail;
	always @(posedge rxclk) new_bit_avail <= (cnt==3);
	always @(posedge rxclk) if(cnt==3) data<={in_data[1],data[7:1]};

	/////////////////////////////////////////////////
	reg end_of_Ethernet_frame;
	
	reg [4:0] sync1;
	always @(posedge rxclk)
		if(end_of_Ethernet_frame)
			sync1<=0; 
		else if(new_bit_avail) begin
			if(!(data==8'h55 || data==8'hAA))	// not preamble?
				sync1 <= 0;
			else
				if(~&sync1)		// if all bits of this "sync1" counter are one, we decide that enough of the preamble
							// has been received, so stop counting and wait for "sync2" to detect the SFD
					sync1 <= sync1 + 1; // otherwise keep counting
		end
	
	reg [9:0] sync2;
	always @(posedge rxclk)
		if(end_of_Ethernet_frame || pktrdy)	// i.e., if we're busy, drop it on the floor
			sync2 <= 0;
		else 
		if(new_bit_avail) begin
			if(|sync2) // if the SFD has already been detected (Ethernet data is coming in)
				sync2 <= sync2 + 1; // then count the bits coming in
			else if(&sync1 && data==8'hD5) // otherwise, let's wait for the SFD (0xD5)
				sync2 <= sync2 + 1;
		end

	wire new_byte_available = new_bit_avail && (sync2[2:0]==3'h0) && (sync2[9:3]!=0);  

	/////////////////////////////////////////////////
	// if no clock transistion is detected for some time, that's the end of the Ethernet frame

	reg [2:0] transition_timeout;
	always @(posedge rxclk) if(in_data[2]^in_data[1]) transition_timeout<=0; else if(~&cnt) transition_timeout<=transition_timeout+1;
	always @(posedge rxclk) end_of_Ethernet_frame <= &transition_timeout;
	
	/////////////////////////////////////////////////
	always @(posedge rxclk)
		if (new_byte_available && !pktrdy) begin
			odata <= data;
			oaddr <= oaddr + 1;
			wr <= 1;
		end else if (end_of_Ethernet_frame && (oaddr > 1)) begin
			olength <= oaddr;
			oaddr <= 0;
			wr <= 0;
			pktrdy <= 1;
		end else if (pktclear) begin
			pktrdy <= 0;
			wr <= 0;
		end else
			wr <= 0;
	
endmodule