X-Git-Url: http://git.joshuawise.com/firearm.git/blobdiff_plain/af096d96b3a5de1f24fc3520b209d9b6a8b946f2..ed1fdafee2a20dea5a6e7f25f1395443313d0986:/Execute.v

diff --git a/Execute.v b/Execute.v
index ea6cd60..4420a75 100644
--- a/Execute.v
+++ b/Execute.v
@@ -2,24 +2,32 @@ module Execute(
 	input clk,
 	input Nrst,	/* XXX not used yet */
 	
-	input stall,
-	input flush,
+	input stall_2a,
+	input flush_2a,
 	
-	input inbubble,
-	input [31:0] pc,
-	input [31:0] insn,
-	input [31:0] cpsr,
-	input [31:0] op0,
-	input [31:0] op1,
-	input [31:0] op2,
-	input carry,
+	input bubble_2a,
+	input [31:0] pc_2a,
+	input [31:0] insn_2a,
+	input [31:0] cpsr_2a,
+	input [31:0] spsr_2a,
+	input [31:0] op0_2a,
+	input [31:0] op1_2a,
+	input [31:0] op2_2a,
+	input carry_2a,
 	
-	output reg outstall = 0,
-	output reg outbubble = 1,
-	output reg [31:0] outcpsr = 0,
-	output reg write_reg = 1'bx,
-	output reg [3:0] write_num = 4'bxxxx,
-	output reg [31:0] write_data = 32'hxxxxxxxx
+	output reg outstall_2a = 0,
+	output reg bubble_3a = 1,
+	output reg [31:0] cpsr_3a = 0,
+	output reg [31:0] spsr_3a = 0,
+	output reg cpsrup_3a = 0,
+	output reg write_reg_3a = 1'bx,
+	output reg [3:0] write_num_3a = 4'bxxxx,
+	output reg [31:0] write_data_3a = 32'hxxxxxxxx,
+	output reg [31:0] jmppc_2a,
+	output reg jmp_2a,
+	output reg [31:0] pc_3a,
+	output reg [31:0] insn_3a,
+	output reg [31:0] op0_3a, op1_3a, op2_3a
 	);
 	
 	reg mult_start;
@@ -27,18 +35,20 @@ module Execute(
 	wire mult_done;
 	wire [31:0] mult_result;
 	
-	reg [31:0] alu_in0, alu_in1;
-	reg [3:0] alu_op;
-	reg alu_setflags;
-	wire [31:0] alu_result, alu_outcpsr;
-	wire alu_setres;
+	reg [31:0] alu_in0_2a, alu_in1_2a;
+	reg [3:0] alu_op_2a;
+	reg alu_setflags_2a;
+	wire [31:0] alu_result_2a, alu_outcpsr_2a;
+	wire alu_setres_2a;
 	
-	reg next_outbubble;
-	reg [31:0] next_outcpsr;
-	reg next_write_reg;
-	reg [3:0] next_write_num;
-	reg [31:0] next_write_data;
+	reg next_bubble_3a;
+	reg [31:0] next_cpsr_3a, next_spsr_3a;
+	reg next_cpsrup_3a;
 	
+	reg next_write_reg_3a;
+	reg [3:0] next_write_num_3a;
+	reg [31:0] next_write_data_3a;
+
 	Multiplier multiplier(
 		.clk(clk), .Nrst(Nrst),
 		.start(mult_start), .acc0(mult_acc0), .in0(mult_in0),
@@ -46,91 +56,190 @@ module Execute(
 	
 	ALU alu(
 		.clk(clk), .Nrst(Nrst),
-		.in0(alu_in0), .in1(alu_in1), .cpsr(cpsr), .op(alu_op),
-		.setflags(alu_setflags), .shifter_carry(carry),
-		.result(alu_result), .cpsr_out(alu_outcpsr), .setres(alu_setres));
-	
+		.in0(alu_in0_2a), .in1(alu_in1_2a), .cpsr(cpsr_2a), .op(alu_op_2a),
+		.setflags(alu_setflags_2a), .shifter_carry(carry_2a),
+		.result(alu_result_2a), .cpsr_out(alu_outcpsr_2a), .setres(alu_setres_2a));
+
 	always @(posedge clk)
 	begin
-		if (!stall)
+		if (!stall_2a)
 		begin
-			outbubble <= next_outbubble;
-			outcpsr <= next_outcpsr;
-			write_reg <= next_write_reg;
-			write_num <= next_write_num;
-			write_data <= next_write_data;
+			bubble_3a <= next_bubble_3a;
+			cpsr_3a <= next_cpsr_3a;
+			spsr_3a <= next_spsr_3a;
+			cpsrup_3a <= next_cpsrup_3a;
+			write_reg_3a <= next_write_reg_3a;
+			write_num_3a <= next_write_num_3a;
+			write_data_3a <= next_write_data_3a;
+			pc_3a <= pc_2a;
+			insn_3a <= insn_2a;
+			op0_3a <= op0_2a;
+			op1_3a <= op1_2a;
+			op2_3a <= op2_2a;
 		end
 	end
-
-	reg prevstall = 0;
+	
+	reg delayedflush_2a = 0;
 	always @(posedge clk)
-		prevstall <= outstall;
+		if (flush_2a && outstall_2a /* halp! I can't do it now, maybe later? */)
+			delayedflush_2a <= 1;
+		else if (!outstall_2a /* anything has been handled this time around */)
+			delayedflush_2a <= 0;
 
+	reg outstall_3a = 0;
+	always @(posedge clk)
+		outstall_3a <= outstall_2a;
+	
+	always @(*)
+	begin
+		outstall_2a = stall_2a;
+		
+		casez (insn_2a)
+		`DECODE_ALU_MULT:	/* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+			outstall_2a = outstall_2a | ((!outstall_3a | !mult_done) && !bubble_2a);
+		endcase
+	end
+	
+	/* ALU inputs */
 	always @(*)
 	begin
-		outstall = stall;
-		next_outbubble = inbubble;
-		next_outcpsr = cpsr;
-		next_write_reg = 0;
-		next_write_num = 4'hx;
-		next_write_data = 32'hxxxxxxxx;
+		alu_in0_2a = op0_2a;
+		alu_in1_2a = op1_2a;
+		alu_op_2a = insn_2a[24:21];
+		alu_setflags_2a = insn_2a[20] /* S */;
+	end
+	
+	/* Register outputs */
+	always @(*)
+	begin
+		next_cpsr_3a = cpsr_2a;
+		next_spsr_3a = spsr_2a;
+		next_cpsrup_3a = 0;
+		next_write_reg_3a = 0;
+		next_write_num_3a = 4'hx;
+		next_write_data_3a = 32'hxxxxxxxx;
+		
+		casez(insn_2a)
+		`DECODE_ALU_MULT:	/* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+		begin
+			next_cpsr_3a = insn_2a[20] /* S */ ? {mult_result[31] /* N */, mult_result == 0 /* Z */, 1'b0 /* C */, cpsr_2a[28] /* V */, cpsr_2a[27:0]} : cpsr_2a;
+			next_cpsrup_3a = insn_2a[20] /* S */;
+			next_write_reg_3a = 1;
+			next_write_num_3a = insn_2a[19:16] /* Rd -- why the fuck isn't this the same place as ALU */;
+			next_write_data_3a = mult_result;
+		end
+		`DECODE_ALU_MRS:	/* MRS (Transfer PSR to register) */
+		begin
+			next_write_reg_3a = 1;
+			next_write_num_3a = insn_2a[15:12];
+			if (insn_2a[22] /* Ps */)
+				next_write_data_3a = spsr_2a;
+			else
+				next_write_data_3a = cpsr_2a;
+		end
+		`DECODE_ALU_MSR,	/* MSR (Transfer register to PSR) */
+		`DECODE_ALU_MSR_FLAGS:	/* MSR (Transfer register or immediate to PSR, flag bits only) */
+		begin
+			if ((cpsr_2a[4:0] == `MODE_USR) || (insn_2a[16] /* that random bit */ == 1'b0))	/* flags only */
+			begin
+				if (insn_2a[22] /* Ps */)
+					next_spsr_3a = {op0_2a[31:29], spsr_2a[28:0]};
+				else
+					next_cpsr_3a = {op0_2a[31:29], cpsr_2a[28:0]};
+			end else begin
+				if (insn_2a[22] /* Ps */)
+					next_spsr_3a = op0_2a;
+				else
+					next_cpsr_3a = op0_2a;
+			end
+			next_cpsrup_3a = 1;
+		end
+		`DECODE_ALU_SWP,	/* Atomic swap */
+		`DECODE_ALU_BX,		/* Branch */
+		`DECODE_ALU_HDATA_REG,	/* Halfword transfer - register offset */
+		`DECODE_ALU_HDATA_IMM:	/* Halfword transfer - immediate offset */
+		begin end
+		`DECODE_ALU:		/* ALU */
+		begin
+			if (alu_setres_2a) begin
+				next_write_reg_3a = 1;
+				next_write_num_3a = insn_2a[15:12] /* Rd */;
+				next_write_data_3a = alu_result_2a;
+			end
+			
+			if (insn_2a[20] /* S */) begin
+				next_cpsrup_3a = 1;
+				next_cpsr_3a = ((insn_2a[15:12] == 4'b1111) && insn_2a[20]) ? spsr_2a : alu_outcpsr_2a;
+			end
+		end
+		`DECODE_LDRSTR_UNDEFINED,	/* Undefined. I hate ARM */
+		`DECODE_LDRSTR,		/* Single data transfer */
+		`DECODE_LDMSTM:		/* Block data transfer */
+		begin end
+		`DECODE_BRANCH:		/* Branch */
+		begin
+			if(insn_2a[24] /* L */) begin
+				next_write_reg_3a = 1;
+				next_write_num_3a = 4'hE; /* link register */
+				next_write_data_3a = pc_2a + 32'h4;
+			end
+		end
+		endcase
+	end
 	
+	/* Multiplier inputs */
+	always @(*)
+	begin
 		mult_start = 0;
 		mult_acc0 = 32'hxxxxxxxx;
 		mult_in0 = 32'hxxxxxxxx;
 		mult_in1 = 32'hxxxxxxxx;
-	
-		alu_in0 = 32'hxxxxxxxx;
-		alu_in1 = 32'hxxxxxxxx;
-		alu_op = 4'hx;	/* hax! */
-		alu_setflags = 1'bx;
 		
-		casez (insn)
-		`DECODE_ALU_MULT:	/* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+		casez(insn_2a)
+		`DECODE_ALU_MULT:
 		begin
-			if (!prevstall && !inbubble)
+			if (!outstall_3a /* i.e., this is a new one */ && !bubble_2a /* i.e., this is a real one */)
 			begin
 				mult_start = 1;
-				mult_acc0 = insn[21] /* A */ ? op0 /* Rn */ : 32'h0;
-				mult_in0 = op1 /* Rm */;
-				mult_in1 = op2 /* Rs */;
+				mult_acc0 = insn_2a[21] /* A */ ? op0_2a /* Rn */ : 32'h0;
+				mult_in0 = op1_2a /* Rm */;
+				mult_in1 = op2_2a /* Rs */;
 				$display("New MUL instruction");
 			end
-			outstall = stall | ((!prevstall | !mult_done) && !inbubble);
-			next_outbubble = inbubble | !mult_done | !prevstall;
-			next_outcpsr = insn[20] /* S */ ? {mult_result[31] /* N */, mult_result == 0 /* Z */, 1'b0 /* C */, cpsr[28] /* V */, cpsr[27:0]} : cpsr;
-			next_write_reg = 1;
-			next_write_num = insn[19:16] /* Rd -- why the fuck isn't this the same place as ALU */;
-			next_write_data = mult_result;
 		end
-//		`DECODE_ALU_MUL_LONG,	/* Multiply long */
+		endcase
+	end
+
+	/* Miscellaneous cleanup. */
+	always @(*)
+	begin
+		next_bubble_3a = bubble_2a | flush_2a | delayedflush_2a;
+
+		jmp_2a = 1'b0;
+		jmppc_2a = 32'h00000000;
+
+		casez (insn_2a)
+		`DECODE_ALU_MULT:	/* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+			next_bubble_3a = next_bubble_3a | !mult_done | !outstall_3a;
 		`DECODE_ALU_MRS,	/* MRS (Transfer PSR to register) */
 		`DECODE_ALU_MSR,	/* MSR (Transfer register to PSR) */
 		`DECODE_ALU_MSR_FLAGS,	/* MSR (Transfer register or immediate to PSR, flag bits only) */
 		`DECODE_ALU_SWP,	/* Atomic swap */
 		`DECODE_ALU_BX,		/* Branch */
 		`DECODE_ALU_HDATA_REG,	/* Halfword transfer - register offset */
-		`DECODE_ALU_HDATA_IMM:	/* Halfword transfer - immediate offset */
+		`DECODE_ALU_HDATA_IMM,	/* Halfword transfer - immediate offset */
+		`DECODE_ALU,		/* ALU */
+		`DECODE_LDRSTR_UNDEFINED,	/* Undefined. I hate ARM */
+		`DECODE_LDRSTR,		/* Single data transfer */
+		`DECODE_LDMSTM:		/* Block data transfer */
 		begin end
-		`DECODE_ALU:		/* ALU */
+		`DECODE_BRANCH:
 		begin
-			alu_in0 = op0;
-			alu_in1 = op1;
-			alu_op = insn[24:21];
-			alu_setflags = insn[20] /* I */;
-			
-			if (alu_setres) begin
-				next_write_reg = 1;
-				next_write_num = insn[15:12] /* Rd */;
-				next_write_data = alu_result;
+			if(!bubble_2a && !flush_2a && !delayedflush_2a && !outstall_2a /* Let someone else take precedence. */) begin
+				jmppc_2a = pc_2a + op0_2a + 32'h8;
+				jmp_2a = 1'b1;
 			end
-			
-			next_outcpsr = alu_outcpsr;
-		end
-		`DECODE_LDRSTR_UNDEFINED,	/* Undefined. I hate ARM */
-		`DECODE_LDRSTR,		/* Single data transfer */
-		`DECODE_LDMSTM,		/* Block data transfer */
-		`DECODE_BRANCH,		/* Branch */
+		end                     /* Branch */
 		`DECODE_LDCSTC,		/* Coprocessor data transfer */
 		`DECODE_CDP,		/* Coprocessor data op */
 		`DECODE_MRCMCR,		/* Coprocessor register transfer */
@@ -179,7 +288,6 @@ module Multiplier(
 	end
 endmodule
 
-/* XXX is the interface correct? */
 module ALU(
 	input clk,
 	input Nrst,	/* XXX not used yet */
@@ -195,15 +303,18 @@ module ALU(
 	output reg [31:0] cpsr_out,
 	output reg setres
 );
-	wire [31:0] res;
-	wire flag_n, flag_z, flag_c, flag_v, setres;
+	reg [31:0] res;
+	reg flag_n, flag_z, flag_c, flag_v;
 	wire [32:0] sum, diff, rdiff;
+	wire sum_v, diff_v, rdiff_v;
 
 	assign sum = {1'b0, in0} + {1'b0, in1};
 	assign diff = {1'b0, in0} - {1'b0, in1};
-	assign rdiff = {1'b0, in1} + {1'b0, in0};
+	assign rdiff = {1'b0, in1} - {1'b0, in0};
+	assign sum_v = (in0[31] ^~ in1[31]) & (sum[31] ^ in0[31]);
+	assign diff_v = (in0[31] ^ in1[31]) & (diff[31] ^ in0[31]);
+	assign rdiff_v = (in0[31] ^ in1[31]) & (rdiff[31] ^ in1[31]);
 
-	/* TODO XXX flag_v not set correctly */
 	always @(*) begin
 		res = 32'hxxxxxxxx;
 		setres = 1'bx;
@@ -222,26 +333,36 @@ module ALU(
 		end
 		`ALU_SUB: begin
 			{flag_c, result} = diff;
+			flag_c = !flag_c;
+			flag_v = diff_v;
 			setres = 1'b1;
 		end
 		`ALU_RSB: begin
 			{flag_c, result} = rdiff;
+			flag_c = !flag_c;
+			flag_v = rdiff_v;
 			setres = 1'b1;
 		end
 		`ALU_ADD: begin
 			{flag_c, result} = sum;
+			flag_v = sum_v;
 			setres = 1'b1;
 		end
 		`ALU_ADC: begin
 			{flag_c, result} = sum + {32'b0, cpsr[`CPSR_C]};
+			flag_v = sum_v | (~sum[31] & result[31]);
 			setres = 1'b1;
 		end
 		`ALU_SBC: begin
 			{flag_c, result} = diff - {32'b0, (~cpsr[`CPSR_C])};
+			flag_c = !flag_c;
+			flag_v = diff_v | (diff[31] & ~result[31]);
 			setres = 1'b1;
 		end
 		`ALU_RSC: begin
 			{flag_c, result} = rdiff - {32'b0, (~cpsr[`CPSR_C])};
+			flag_c = !flag_c;
+			flag_v = rdiff_v | (rdiff[31] & ~result[31]);
 			setres = 1'b1;
 		end
 		`ALU_TST: begin
@@ -256,10 +377,13 @@ module ALU(
 		end
 		`ALU_CMP: begin
 			{flag_c, result} = diff;
+			flag_c = !flag_c;
+			flag_v = diff_v;
 			setres = 1'b0;
 		end
 		`ALU_CMN: begin
 			{flag_c, result} = sum;
+			flag_v = sum_v;
 			setres = 1'b0;
 		end
 		`ALU_ORR: begin