X-Git-Url: http://git.joshuawise.com/firearm.git/blobdiff_plain/5b3daee2fb720393ea9afbbf8647f912701b6fed..93414280b69bb855ec46feac021191cc359e3c13:/Execute.v?ds=inline diff --git a/Execute.v b/Execute.v index 64999fa..ac759bb 100644 --- a/Execute.v +++ b/Execute.v @@ -9,15 +9,259 @@ module Execute( input [31:0] pc, input [31:0] insn, input [31:0] cpsr, - input reg [31:0] op0, - input reg [31:0] op1, - input reg [31:0] op2, - input reg carry, + input [31:0] op0, + input [31:0] op1, + input [31:0] op2, + input carry, output reg outstall = 0, output reg outbubble = 1, + output reg [31:0] outcpsr = 0, + output reg write_reg = 1'bx, + output reg [3:0] write_num = 4'bxxxx, + output reg [31:0] write_data = 32'hxxxxxxxx ); + + reg mult_start; + reg [31:0] mult_acc0, mult_in0, mult_in1; + wire mult_done; + wire [31:0] mult_result; + + reg [31:0] alu_in0, alu_in1; + reg [3:0] alu_op; + reg alu_setflags; + wire [31:0] alu_result, alu_outcpsr; + wire alu_setres; + + reg next_outbubble; + reg [31:0] next_outcpsr; + reg next_write_reg; + reg [3:0] next_write_num; + reg [31:0] next_write_data; + + Multiplier multiplier( + .clk(clk), .Nrst(Nrst), + .start(mult_start), .acc0(mult_acc0), .in0(mult_in0), + .in1(mult_in1), .done(mult_done), .result(mult_result)); + + ALU alu( + .clk(clk), .Nrst(Nrst), + .in0(alu_in0), .in1(alu_in1), .cpsr(cpsr), .op(alu_op), + .setflags(alu_setflags), .shifter_carry(carry), + .result(alu_result), .cpsr_out(alu_outcpsr), .setres(alu_setres)); + + always @(posedge clk) + begin + if (!stall) + begin + outbubble <= next_outbubble; + outcpsr <= next_outcpsr; + write_reg <= next_write_reg; + write_num <= next_write_num; + write_data <= next_write_data; + end + end + always @(*) + begin + outstall = stall; + next_outbubble = inbubble; + next_outcpsr = cpsr; + next_write_reg = 0; + next_write_num = 4'hx; + next_write_data = 32'hxxxxxxxx; + + alu_in0 = 32'hxxxxxxxx; + alu_in1 = 32'hxxxxxxxx; + alu_op = 4'hx; /* hax! */ + alu_setflags = 1'bx; + + casez (insn) + `DECODE_ALU_MULT, /* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */ +// `DECODE_ALU_MUL_LONG, /* Multiply long */ + `DECODE_ALU_MRS, /* MRS (Transfer PSR to register) */ + `DECODE_ALU_MSR, /* MSR (Transfer register to PSR) */ + `DECODE_ALU_MSR_FLAGS, /* MSR (Transfer register or immediate to PSR, flag bits only) */ + `DECODE_ALU_SWP, /* Atomic swap */ + `DECODE_ALU_BX, /* Branch */ + `DECODE_ALU_HDATA_REG, /* Halfword transfer - register offset */ + `DECODE_ALU_HDATA_IMM: /* Halfword transfer - immediate offset */ + begin end + `DECODE_ALU: /* ALU */ + begin + alu_in0 = op0; + alu_in1 = op1; + alu_op = insn[24:21]; + alu_setflags = insn[20] /* I */; + + if (alu_setres) begin + next_write_reg = 1; + next_write_num = insn[15:12] /* Rd */; + next_write_data = alu_result; + end + + next_outcpsr = alu_outcpsr; + end + `DECODE_LDRSTR_UNDEFINED, /* Undefined. I hate ARM */ + `DECODE_LDRSTR, /* Single data transfer */ + `DECODE_LDMSTM, /* Block data transfer */ + `DECODE_BRANCH, /* Branch */ + `DECODE_LDCSTC, /* Coprocessor data transfer */ + `DECODE_CDP, /* Coprocessor data op */ + `DECODE_MRCMCR, /* Coprocessor register transfer */ + `DECODE_SWI: /* SWI */ + begin end + default: /* X everything else out */ + begin end + endcase + end +endmodule + +module Multiplier( + input clk, + input Nrst, /* XXX not used yet */ + input start, + input [31:0] acc0, + input [31:0] in0, + input [31:0] in1, + output reg done = 0, + output reg [31:0] result); + + reg [31:0] bitfield; + reg [31:0] multiplicand; + reg [31:0] acc; + + always @(posedge clk) + begin + if (start) begin + bitfield <= in0; + multiplicand <= in1; + acc <= acc0; + done <= 0; + end else begin + bitfield <= {2'b00, bitfield[31:2]}; + multiplicand <= {multiplicand[29:0], 2'b00}; + acc <= acc + + (bitfield[0] ? multiplicand : 0) + + (bitfield[1] ? {multiplicand[30:0], 1'b0} : 0); + if (bitfield == 0) begin + result <= acc; + done <= 1; + end + end + end +endmodule + +/* XXX is the interface correct? */ +module ALU( + input clk, + input Nrst, /* XXX not used yet */ + + input [31:0] in0, + input [31:0] in1, + input [31:0] cpsr, + input [3:0] op, + input setflags, + input shifter_carry, + + output reg [31:0] result, + output reg [31:0] cpsr_out, + output reg setres +); + wire [31:0] res; + wire flag_n, flag_z, flag_c, flag_v, setres; + wire [32:0] sum, diff, rdiff; + + assign sum = {1'b0, in0} + {1'b0, in1}; + assign diff = {1'b0, in0} - {1'b0, in1}; + assign rdiff = {1'b0, in1} + {1'b0, in0}; + + /* TODO XXX flag_v not set correctly */ + always @(*) begin + res = 32'hxxxxxxxx; + setres = 1'bx; + flag_c = cpsr[`CPSR_C]; + flag_v = cpsr[`CPSR_V]; + case(op) + `ALU_AND: begin + result = in0 & in1; + flag_c = shifter_carry; + setres = 1'b1; + end + `ALU_EOR: begin + result = in0 ^ in1; + flag_c = shifter_carry; + setres = 1'b1; + end + `ALU_SUB: begin + {flag_c, result} = diff; + setres = 1'b1; + end + `ALU_RSB: begin + {flag_c, result} = rdiff; + setres = 1'b1; + end + `ALU_ADD: begin + {flag_c, result} = sum; + setres = 1'b1; + end + `ALU_ADC: begin + {flag_c, result} = sum + {32'b0, cpsr[`CPSR_C]}; + setres = 1'b1; + end + `ALU_SBC: begin + {flag_c, result} = diff - {32'b0, (~cpsr[`CPSR_C])}; + setres = 1'b1; + end + `ALU_RSC: begin + {flag_c, result} = rdiff - {32'b0, (~cpsr[`CPSR_C])}; + setres = 1'b1; + end + `ALU_TST: begin + result = in0 & in1; + flag_c = shifter_carry; + setres = 1'b0; + end + `ALU_TEQ: begin + result = in0 ^ in1; + flag_c = shifter_carry; + setres = 1'b0; + end + `ALU_CMP: begin + {flag_c, result} = diff; + setres = 1'b0; + end + `ALU_CMN: begin + {flag_c, result} = sum; + setres = 1'b0; + end + `ALU_ORR: begin + result = in0 | in1; + flag_c = shifter_carry; + setres = 1'b1; + end + `ALU_MOV: begin + result = in1; + flag_c = shifter_carry; + setres = 1'b1; + end + `ALU_BIC: begin + result = in0 & (~in1); + flag_c = shifter_carry; + setres = 1'b1; + end + `ALU_MVN: begin + result = ~in1; + flag_c = shifter_carry; + setres = 1'b1; + end + endcase + + flag_z = (result == 0); + flag_n = result[31]; + + cpsr_out = setflags ? {flag_n, flag_z, flag_c, flag_v, cpsr[27:0]} : cpsr; + end endmodule