X-Git-Url: http://git.joshuawise.com/firearm.git/blobdiff_plain/3f5cefe1c95feae38570a648b2d1a2bc021919b7..refs/heads/master:/Execute.v?ds=sidebyside

diff --git a/Execute.v b/Execute.v
index 5ba0a9a..4420a75 100644
--- a/Execute.v
+++ b/Execute.v
@@ -2,20 +2,415 @@ module Execute(
 	input clk,
 	input Nrst,	/* XXX not used yet */
 	
-	input stall,
-	input flush,
+	input stall_2a,
+	input flush_2a,
 	
-	input inbubble,
-	input [31:0] pc,
-	input [31:0] insn,
-	input [31:0] cpsr,
-	input [31:0] op0,
-	input [31:0] op1,
-	input [31:0] op2,
-	input carry,
+	input bubble_2a,
+	input [31:0] pc_2a,
+	input [31:0] insn_2a,
+	input [31:0] cpsr_2a,
+	input [31:0] spsr_2a,
+	input [31:0] op0_2a,
+	input [31:0] op1_2a,
+	input [31:0] op2_2a,
+	input carry_2a,
 	
-	output reg outstall = 0,
-	output reg outbubble = 1
+	output reg outstall_2a = 0,
+	output reg bubble_3a = 1,
+	output reg [31:0] cpsr_3a = 0,
+	output reg [31:0] spsr_3a = 0,
+	output reg cpsrup_3a = 0,
+	output reg write_reg_3a = 1'bx,
+	output reg [3:0] write_num_3a = 4'bxxxx,
+	output reg [31:0] write_data_3a = 32'hxxxxxxxx,
+	output reg [31:0] jmppc_2a,
+	output reg jmp_2a,
+	output reg [31:0] pc_3a,
+	output reg [31:0] insn_3a,
+	output reg [31:0] op0_3a, op1_3a, op2_3a
 	);
 	
+	reg mult_start;
+	reg [31:0] mult_acc0, mult_in0, mult_in1;
+	wire mult_done;
+	wire [31:0] mult_result;
+	
+	reg [31:0] alu_in0_2a, alu_in1_2a;
+	reg [3:0] alu_op_2a;
+	reg alu_setflags_2a;
+	wire [31:0] alu_result_2a, alu_outcpsr_2a;
+	wire alu_setres_2a;
+	
+	reg next_bubble_3a;
+	reg [31:0] next_cpsr_3a, next_spsr_3a;
+	reg next_cpsrup_3a;
+	
+	reg next_write_reg_3a;
+	reg [3:0] next_write_num_3a;
+	reg [31:0] next_write_data_3a;
+
+	Multiplier multiplier(
+		.clk(clk), .Nrst(Nrst),
+		.start(mult_start), .acc0(mult_acc0), .in0(mult_in0),
+		.in1(mult_in1), .done(mult_done), .result(mult_result));
+	
+	ALU alu(
+		.clk(clk), .Nrst(Nrst),
+		.in0(alu_in0_2a), .in1(alu_in1_2a), .cpsr(cpsr_2a), .op(alu_op_2a),
+		.setflags(alu_setflags_2a), .shifter_carry(carry_2a),
+		.result(alu_result_2a), .cpsr_out(alu_outcpsr_2a), .setres(alu_setres_2a));
+
+	always @(posedge clk)
+	begin
+		if (!stall_2a)
+		begin
+			bubble_3a <= next_bubble_3a;
+			cpsr_3a <= next_cpsr_3a;
+			spsr_3a <= next_spsr_3a;
+			cpsrup_3a <= next_cpsrup_3a;
+			write_reg_3a <= next_write_reg_3a;
+			write_num_3a <= next_write_num_3a;
+			write_data_3a <= next_write_data_3a;
+			pc_3a <= pc_2a;
+			insn_3a <= insn_2a;
+			op0_3a <= op0_2a;
+			op1_3a <= op1_2a;
+			op2_3a <= op2_2a;
+		end
+	end
+	
+	reg delayedflush_2a = 0;
+	always @(posedge clk)
+		if (flush_2a && outstall_2a /* halp! I can't do it now, maybe later? */)
+			delayedflush_2a <= 1;
+		else if (!outstall_2a /* anything has been handled this time around */)
+			delayedflush_2a <= 0;
+
+	reg outstall_3a = 0;
+	always @(posedge clk)
+		outstall_3a <= outstall_2a;
+	
+	always @(*)
+	begin
+		outstall_2a = stall_2a;
+		
+		casez (insn_2a)
+		`DECODE_ALU_MULT:	/* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+			outstall_2a = outstall_2a | ((!outstall_3a | !mult_done) && !bubble_2a);
+		endcase
+	end
+	
+	/* ALU inputs */
+	always @(*)
+	begin
+		alu_in0_2a = op0_2a;
+		alu_in1_2a = op1_2a;
+		alu_op_2a = insn_2a[24:21];
+		alu_setflags_2a = insn_2a[20] /* S */;
+	end
+	
+	/* Register outputs */
+	always @(*)
+	begin
+		next_cpsr_3a = cpsr_2a;
+		next_spsr_3a = spsr_2a;
+		next_cpsrup_3a = 0;
+		next_write_reg_3a = 0;
+		next_write_num_3a = 4'hx;
+		next_write_data_3a = 32'hxxxxxxxx;
+		
+		casez(insn_2a)
+		`DECODE_ALU_MULT:	/* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+		begin
+			next_cpsr_3a = insn_2a[20] /* S */ ? {mult_result[31] /* N */, mult_result == 0 /* Z */, 1'b0 /* C */, cpsr_2a[28] /* V */, cpsr_2a[27:0]} : cpsr_2a;
+			next_cpsrup_3a = insn_2a[20] /* S */;
+			next_write_reg_3a = 1;
+			next_write_num_3a = insn_2a[19:16] /* Rd -- why the fuck isn't this the same place as ALU */;
+			next_write_data_3a = mult_result;
+		end
+		`DECODE_ALU_MRS:	/* MRS (Transfer PSR to register) */
+		begin
+			next_write_reg_3a = 1;
+			next_write_num_3a = insn_2a[15:12];
+			if (insn_2a[22] /* Ps */)
+				next_write_data_3a = spsr_2a;
+			else
+				next_write_data_3a = cpsr_2a;
+		end
+		`DECODE_ALU_MSR,	/* MSR (Transfer register to PSR) */
+		`DECODE_ALU_MSR_FLAGS:	/* MSR (Transfer register or immediate to PSR, flag bits only) */
+		begin
+			if ((cpsr_2a[4:0] == `MODE_USR) || (insn_2a[16] /* that random bit */ == 1'b0))	/* flags only */
+			begin
+				if (insn_2a[22] /* Ps */)
+					next_spsr_3a = {op0_2a[31:29], spsr_2a[28:0]};
+				else
+					next_cpsr_3a = {op0_2a[31:29], cpsr_2a[28:0]};
+			end else begin
+				if (insn_2a[22] /* Ps */)
+					next_spsr_3a = op0_2a;
+				else
+					next_cpsr_3a = op0_2a;
+			end
+			next_cpsrup_3a = 1;
+		end
+		`DECODE_ALU_SWP,	/* Atomic swap */
+		`DECODE_ALU_BX,		/* Branch */
+		`DECODE_ALU_HDATA_REG,	/* Halfword transfer - register offset */
+		`DECODE_ALU_HDATA_IMM:	/* Halfword transfer - immediate offset */
+		begin end
+		`DECODE_ALU:		/* ALU */
+		begin
+			if (alu_setres_2a) begin
+				next_write_reg_3a = 1;
+				next_write_num_3a = insn_2a[15:12] /* Rd */;
+				next_write_data_3a = alu_result_2a;
+			end
+			
+			if (insn_2a[20] /* S */) begin
+				next_cpsrup_3a = 1;
+				next_cpsr_3a = ((insn_2a[15:12] == 4'b1111) && insn_2a[20]) ? spsr_2a : alu_outcpsr_2a;
+			end
+		end
+		`DECODE_LDRSTR_UNDEFINED,	/* Undefined. I hate ARM */
+		`DECODE_LDRSTR,		/* Single data transfer */
+		`DECODE_LDMSTM:		/* Block data transfer */
+		begin end
+		`DECODE_BRANCH:		/* Branch */
+		begin
+			if(insn_2a[24] /* L */) begin
+				next_write_reg_3a = 1;
+				next_write_num_3a = 4'hE; /* link register */
+				next_write_data_3a = pc_2a + 32'h4;
+			end
+		end
+		endcase
+	end
+	
+	/* Multiplier inputs */
+	always @(*)
+	begin
+		mult_start = 0;
+		mult_acc0 = 32'hxxxxxxxx;
+		mult_in0 = 32'hxxxxxxxx;
+		mult_in1 = 32'hxxxxxxxx;
+		
+		casez(insn_2a)
+		`DECODE_ALU_MULT:
+		begin
+			if (!outstall_3a /* i.e., this is a new one */ && !bubble_2a /* i.e., this is a real one */)
+			begin
+				mult_start = 1;
+				mult_acc0 = insn_2a[21] /* A */ ? op0_2a /* Rn */ : 32'h0;
+				mult_in0 = op1_2a /* Rm */;
+				mult_in1 = op2_2a /* Rs */;
+				$display("New MUL instruction");
+			end
+		end
+		endcase
+	end
+
+	/* Miscellaneous cleanup. */
+	always @(*)
+	begin
+		next_bubble_3a = bubble_2a | flush_2a | delayedflush_2a;
+
+		jmp_2a = 1'b0;
+		jmppc_2a = 32'h00000000;
+
+		casez (insn_2a)
+		`DECODE_ALU_MULT:	/* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+			next_bubble_3a = next_bubble_3a | !mult_done | !outstall_3a;
+		`DECODE_ALU_MRS,	/* MRS (Transfer PSR to register) */
+		`DECODE_ALU_MSR,	/* MSR (Transfer register to PSR) */
+		`DECODE_ALU_MSR_FLAGS,	/* MSR (Transfer register or immediate to PSR, flag bits only) */
+		`DECODE_ALU_SWP,	/* Atomic swap */
+		`DECODE_ALU_BX,		/* Branch */
+		`DECODE_ALU_HDATA_REG,	/* Halfword transfer - register offset */
+		`DECODE_ALU_HDATA_IMM,	/* Halfword transfer - immediate offset */
+		`DECODE_ALU,		/* ALU */
+		`DECODE_LDRSTR_UNDEFINED,	/* Undefined. I hate ARM */
+		`DECODE_LDRSTR,		/* Single data transfer */
+		`DECODE_LDMSTM:		/* Block data transfer */
+		begin end
+		`DECODE_BRANCH:
+		begin
+			if(!bubble_2a && !flush_2a && !delayedflush_2a && !outstall_2a /* Let someone else take precedence. */) begin
+				jmppc_2a = pc_2a + op0_2a + 32'h8;
+				jmp_2a = 1'b1;
+			end
+		end                     /* Branch */
+		`DECODE_LDCSTC,		/* Coprocessor data transfer */
+		`DECODE_CDP,		/* Coprocessor data op */
+		`DECODE_MRCMCR,		/* Coprocessor register transfer */
+		`DECODE_SWI:		/* SWI */
+		begin end
+		default:		/* X everything else out */
+		begin end
+		endcase
+	end
+endmodule
+
+module Multiplier(
+	input clk,
+	input Nrst,	/* XXX not used yet */
+	
+	input start,
+	input [31:0] acc0,
+	input [31:0] in0,
+	input [31:0] in1,
+	
+	output reg done = 0,
+	output reg [31:0] result);
+	
+	reg [31:0] bitfield;
+	reg [31:0] multiplicand;
+	reg [31:0] acc;
+	
+	always @(posedge clk)
+	begin
+		if (start) begin
+			bitfield <= in0;
+			multiplicand <= in1;
+			acc <= acc0;
+			done <= 0;
+		end else begin
+			bitfield <= {2'b00, bitfield[31:2]};
+			multiplicand <= {multiplicand[29:0], 2'b00};
+			acc <= acc +
+				(bitfield[0] ? multiplicand : 0) +
+				(bitfield[1] ? {multiplicand[30:0], 1'b0} : 0);
+			if (bitfield == 0) begin
+				result <= acc;
+				done <= 1;
+			end
+		end
+	end
+endmodule
+
+module ALU(
+	input clk,
+	input Nrst,	/* XXX not used yet */
+
+	input [31:0] in0,
+	input [31:0] in1,
+	input [31:0] cpsr,
+	input [3:0] op,
+	input setflags,
+	input shifter_carry,
+
+	output reg [31:0] result,
+	output reg [31:0] cpsr_out,
+	output reg setres
+);
+	reg [31:0] res;
+	reg flag_n, flag_z, flag_c, flag_v;
+	wire [32:0] sum, diff, rdiff;
+	wire sum_v, diff_v, rdiff_v;
+
+	assign sum = {1'b0, in0} + {1'b0, in1};
+	assign diff = {1'b0, in0} - {1'b0, in1};
+	assign rdiff = {1'b0, in1} - {1'b0, in0};
+	assign sum_v = (in0[31] ^~ in1[31]) & (sum[31] ^ in0[31]);
+	assign diff_v = (in0[31] ^ in1[31]) & (diff[31] ^ in0[31]);
+	assign rdiff_v = (in0[31] ^ in1[31]) & (rdiff[31] ^ in1[31]);
+
+	always @(*) begin
+		res = 32'hxxxxxxxx;
+		setres = 1'bx;
+		flag_c = cpsr[`CPSR_C];
+		flag_v = cpsr[`CPSR_V];
+		case(op)
+		`ALU_AND: begin
+			result = in0 & in1;
+			flag_c = shifter_carry;
+			setres = 1'b1;
+		end
+		`ALU_EOR: begin
+			result = in0 ^ in1;
+			flag_c = shifter_carry;
+			setres = 1'b1;
+		end
+		`ALU_SUB: begin
+			{flag_c, result} = diff;
+			flag_c = !flag_c;
+			flag_v = diff_v;
+			setres = 1'b1;
+		end
+		`ALU_RSB: begin
+			{flag_c, result} = rdiff;
+			flag_c = !flag_c;
+			flag_v = rdiff_v;
+			setres = 1'b1;
+		end
+		`ALU_ADD: begin
+			{flag_c, result} = sum;
+			flag_v = sum_v;
+			setres = 1'b1;
+		end
+		`ALU_ADC: begin
+			{flag_c, result} = sum + {32'b0, cpsr[`CPSR_C]};
+			flag_v = sum_v | (~sum[31] & result[31]);
+			setres = 1'b1;
+		end
+		`ALU_SBC: begin
+			{flag_c, result} = diff - {32'b0, (~cpsr[`CPSR_C])};
+			flag_c = !flag_c;
+			flag_v = diff_v | (diff[31] & ~result[31]);
+			setres = 1'b1;
+		end
+		`ALU_RSC: begin
+			{flag_c, result} = rdiff - {32'b0, (~cpsr[`CPSR_C])};
+			flag_c = !flag_c;
+			flag_v = rdiff_v | (rdiff[31] & ~result[31]);
+			setres = 1'b1;
+		end
+		`ALU_TST: begin
+			result = in0 & in1;
+			flag_c = shifter_carry;
+			setres = 1'b0;
+		end
+		`ALU_TEQ: begin
+			result = in0 ^ in1;
+			flag_c = shifter_carry;
+			setres = 1'b0;
+		end
+		`ALU_CMP: begin
+			{flag_c, result} = diff;
+			flag_c = !flag_c;
+			flag_v = diff_v;
+			setres = 1'b0;
+		end
+		`ALU_CMN: begin
+			{flag_c, result} = sum;
+			flag_v = sum_v;
+			setres = 1'b0;
+		end
+		`ALU_ORR: begin
+			result = in0 | in1;
+			flag_c = shifter_carry;
+			setres = 1'b1;
+		end
+		`ALU_MOV: begin
+			result = in1;
+			flag_c = shifter_carry;
+			setres = 1'b1;
+		end
+		`ALU_BIC: begin
+			result = in0 & (~in1);
+			flag_c = shifter_carry;
+			setres = 1'b1;
+		end
+		`ALU_MVN: begin
+			result = ~in1;
+			flag_c = shifter_carry;
+			setres = 1'b1;
+		end
+		endcase
+		
+		flag_z = (result == 0);
+		flag_n = result[31];
+		
+		cpsr_out = setflags ? {flag_n, flag_z, flag_c, flag_v, cpsr[27:0]} : cpsr;
+	end
 endmodule