input flush,
/* bus interface */
- output reg [31:0] busaddr,
- output reg rd_req,
- output reg wr_req,
- input rw_wait,
- output reg [31:0] wr_data,
- input [31:0] rd_data,
- output reg [2:0] data_size,
+ output reg [31:0] dc__addr_3a,
+ output reg dc__rd_req_3a,
+ output reg dc__wr_req_3a,
+ input dc__rw_wait_3a,
+ output reg [31:0] dc__wr_data_3a,
+ input [31:0] dc__rd_data_3a,
+ output reg [2:0] dc__data_size_3a,
/* regfile interface */
- output reg [3:0] st_read,
- input [31:0] st_data,
+ output reg [3:0] rf__read_3_3a,
+ input [31:0] rf__rdata_3_3a,
/* Coprocessor interface */
output reg cp_req,
output reg [31:0] cp_write,
/* stage inputs */
- input inbubble,
- input [31:0] pc,
- input [31:0] insn,
- input [31:0] op0,
- input [31:0] op1,
- input [31:0] op2,
- input [31:0] spsr,
- input [31:0] cpsr,
- input cpsrup,
- input write_reg,
- input [3:0] write_num,
- input [31:0] write_data,
+ input bubble_3a,
+ input [31:0] pc_3a,
+ input [31:0] insn_3a,
+ input [31:0] op0_3a,
+ input [31:0] op1_3a,
+ input [31:0] op2_3a,
+ input [31:0] spsr_3a,
+ input [31:0] cpsr_3a,
+ input cpsrup_3a,
+ input write_reg_3a,
+ input [3:0] write_num_3a,
+ input [31:0] write_data_3a,
/* outputs */
output reg outstall,
always @(posedge clk)
begin
- outpc <= pc;
- outinsn <= insn;
+ outpc <= pc_3a;
+ outinsn <= insn_3a;
outbubble <= next_outbubble;
out_write_reg <= next_write_reg;
out_write_num <= next_write_num;
out_write_data <= next_write_data;
- regs <= next_regs;
- prev_reg <= cur_reg;
- if (!rw_wait)
+ if (!dc__rw_wait_3a)
prev_offset <= offset;
prev_raddr <= raddr;
outcpsr <= next_outcpsr;
- outspsr <= spsr;
+ outspsr <= spsr_3a;
outcpsrup <= next_outcpsrup;
swp_state <= next_swp_state;
lsm_state <= next_lsm_state;
lsr_state <= next_lsr_state;
lsrh_state <= next_lsrh_state;
if (do_rd_data_latch)
- rd_data_latch <= rd_data;
+ rd_data_latch <= dc__rd_data_3a;
+ swp_oldval <= next_swp_oldval;
prevaddr <= addr;
end
next_lsr_state = lsr_state;
next_lsrh_state = lsrh_state;
next_swp_state = swp_state;
- casez(insn)
- `DECODE_ALU_SWP: if(!inbubble) begin
+ casez(insn_3a)
+ `DECODE_ALU_SWP: if(!bubble_3a) begin
case(swp_state)
`SWP_READING: begin
outstall = 1'b1;
- if (!rw_wait)
+ if (!dc__rw_wait_3a)
next_swp_state = `SWP_WRITING;
$display("SWP: read stage");
end
`SWP_WRITING: begin
- outstall = rw_wait;
- if(!rw_wait)
+ outstall = dc__rw_wait_3a;
+ if(!dc__rw_wait_3a)
next_swp_state = `SWP_READING;
$display("SWP: write stage");
end
end
endcase
end
- `DECODE_ALU_MULT: begin end
+ `DECODE_ALU_MULT: begin
+ outstall = 1'b0; /* XXX work around for Xilinx bug */
+ next_lsrh_state = lsrh_state;
+ end
`DECODE_ALU_HDATA_REG,
- `DECODE_ALU_HDATA_IMM: if(!inbubble) begin
+ `DECODE_ALU_HDATA_IMM: if(!bubble_3a) begin
case(lsrh_state)
`LSRH_MEMIO: begin
- outstall = rw_wait;
- if(insn[21] | !insn[24]) begin
+ outstall = dc__rw_wait_3a;
+ if(insn_3a[21] | !insn_3a[24]) begin
outstall = 1'b1;
- if(!rw_wait)
+ if(!dc__rw_wait_3a)
next_lsrh_state = `LSRH_BASEWB;
end
next_lsrh_state = `LSRH_MEMIO;
end
- $display("ALU_LDRSTRH: rd_req %d, wr_req %d", rd_req, wr_req);
+ $display("ALU_LDRSTRH: rd_req %d, wr_req %d", dc__rd_req_3a, dc__wr_req_3a);
end
`LSRH_BASEWB: begin
outstall = 1'b1;
endcase
end
`DECODE_LDRSTR_UNDEFINED: begin end
- `DECODE_LDRSTR: if(!inbubble) begin
- outstall = rw_wait;
+ `DECODE_LDRSTR: if(!bubble_3a) begin
+ outstall = dc__rw_wait_3a;
case(lsr_state)
`LSR_MEMIO: begin
- outstall = rw_wait;
+ outstall = dc__rw_wait_3a;
next_lsr_state = `LSR_MEMIO;
- if (insn[22] /* B */ && !insn[20] /* L */) begin /* i.e., strb */
+ if (insn_3a[22] /* B */ && !insn_3a[20] /* L */) begin /* i.e., strb */
outstall = 1'b1;
- if (!rw_wait)
+ if (!dc__rw_wait_3a)
next_lsr_state = `LSR_STRB_WR;
- end else if (insn[21] /* W */ || !insn[24] /* P */) begin /* writeback needed */
+ end else if (insn_3a[21] /* W */ || !insn_3a[24] /* P */) begin /* writeback needed */
outstall = 1'b1;
- if (!rw_wait)
+ if (!dc__rw_wait_3a)
next_lsr_state = `LSR_BASEWB;
end
outstall = 1'b0;
next_lsr_state = `LSR_MEMIO;
end
- $display("LDRSTR: rd_req %d, wr_req %d, raddr %08x, wait %d", rd_req, wr_req, raddr, rw_wait);
+ $display("LDRSTR: rd_req %d, wr_req %d, raddr %08x, wait %d", dc__rd_req_3a, dc__wr_req_3a, raddr, dc__rw_wait_3a);
end
`LSR_STRB_WR: begin
outstall = 1;
- if(insn[21] /* W */ | !insn[24] /* P */) begin
- if(!rw_wait)
+ if(insn_3a[21] /* W */ | !insn_3a[24] /* P */) begin
+ if(!dc__rw_wait_3a)
next_lsr_state = `LSR_BASEWB;
- end else if (!rw_wait)
+ end else if (!dc__rw_wait_3a)
next_lsr_state = `LSR_WBFLUSH;
$display("LDRSTR: Handling STRB");
end
next_lsr_state = 4'bxxxx;
end
endcase
- $display("LDRSTR: Decoded, bubble %d, insn %08x, lsm state %b -> %b, stall %d", inbubble, insn, lsr_state, next_lsr_state, outstall);
+ $display("LDRSTR: Decoded, bubble %d, insn %08x, lsm state %b -> %b, stall %d", bubble_3a, insn_3a, lsr_state, next_lsr_state, outstall);
end
- `DECODE_LDMSTM: if(!inbubble) begin
- outstall = rw_wait;
+ `DECODE_LDMSTM: if(!bubble_3a) begin
+ outstall = dc__rw_wait_3a;
case(lsm_state)
`LSM_SETUP: begin
outstall = 1'b1;
outstall = 1'b0;
next_lsm_state = `LSM_SETUP;
end
- $display("LDMSTM: Round 1: base register: %08x, reg list %b", op0, op1[15:0]);
+ $display("LDMSTM: Round 1: base register: %08x, reg list %b", op0_3a, op1_3a[15:0]);
end
`LSM_MEMIO: begin
outstall = 1'b1;
- if(next_regs == 16'b0) begin
+ if(next_regs == 16'b0 && !dc__rw_wait_3a) begin
next_lsm_state = `LSM_BASEWB;
end
- $display("LDMSTM: Stage 2: Writing: regs %b, next_regs %b, reg %d, wr_data %08x, addr %08x", regs, next_regs, cur_reg, wr_data, busaddr);
+ $display("LDMSTM: Stage 2: Writing: regs %b, next_regs %b, reg %d, wr_data %08x, addr %08x", regs, next_regs, cur_reg, rf__rdata_3_3a, dc__addr_3a);
end
`LSM_BASEWB: begin
outstall = 1;
next_lsm_state = 4'bxxxx;
end
endcase
- $display("LDMSTM: Decoded, bubble %d, insn %08x, lsm state %b -> %b, stall %d", inbubble, insn, lsm_state, next_lsm_state, outstall);
+ $display("LDMSTM: Decoded, bubble %d, insn %08x, lsm state %b -> %b, stall %d", bubble_3a, insn_3a, lsm_state, next_lsm_state, outstall);
end
- `DECODE_LDCSTC: if(!inbubble) begin
+ `DECODE_LDCSTC: if(!bubble_3a) begin
$display("WARNING: Unimplemented LDCSTC");
end
- `DECODE_CDP: if (!inbubble) begin
+ `DECODE_CDP: if (!bubble_3a) begin
if (cp_busy) begin
outstall = 1;
end
$display("WARNING: Possible CDP undefined instruction");
end
end
- `DECODE_MRCMCR: if (!inbubble) begin
+ `DECODE_MRCMCR: if (!bubble_3a) begin
if (cp_busy) begin
outstall = 1;
end
cp_req = 0;
cp_rnw = 1'bx;
cp_write = 32'hxxxxxxxx;
- casez (insn)
- `DECODE_CDP: if(!inbubble) begin
+ casez (insn_3a)
+ `DECODE_CDP: if(!bubble_3a) begin
cp_req = 1;
end
- `DECODE_MRCMCR: if(!inbubble) begin
+ `DECODE_MRCMCR: if(!bubble_3a) begin
cp_req = 1;
- cp_rnw = insn[20] /* L */;
- if (insn[20] == 0 /* store to coprocessor */)
- cp_write = op0;
+ cp_rnw = insn_3a[20] /* L */;
+ if (insn_3a[20] == 0 /* store to coprocessor */)
+ cp_write = op0_3a;
end
endcase
end
/* Register output logic. */
always @(*)
begin
- next_write_reg = write_reg;
- next_write_num = write_num;
- next_write_data = write_data;
- next_outcpsr = lsm_state == 4'b0010 ? outcpsr : cpsr;
- next_outcpsrup = cpsrup;
+ next_write_reg = write_reg_3a;
+ next_write_num = write_num_3a;
+ next_write_data = write_data_3a;
+ next_outcpsr = lsm_state == 4'b0010 ? outcpsr : cpsr_3a;
+ next_outcpsrup = cpsrup_3a;
- casez(insn)
- `DECODE_ALU_SWP: if (!inbubble) begin
+ casez(insn_3a)
+ `DECODE_ALU_SWP: if (!bubble_3a) begin
next_write_reg = 1'bx;
next_write_num = 4'bxxxx;
next_write_data = 32'hxxxxxxxx;
next_write_reg = 1'b0;
`SWP_WRITING: begin
next_write_reg = 1'b1;
- next_write_num = insn[15:12];
- next_write_data = insn[22] ? {24'b0, swp_oldval[7:0]} : swp_oldval;
+ next_write_num = insn_3a[15:12];
+ next_write_data = insn_3a[22] ? {24'b0, swp_oldval[7:0]} : swp_oldval;
end
default: begin end
endcase
end
- `DECODE_ALU_MULT: begin end
+ `DECODE_ALU_MULT: begin
+ next_write_reg = write_reg_3a; /* XXX workaround for ISE 10.1 bug */
+ next_write_num = write_num_3a;
+ next_write_data = write_data_3a;
+ next_outcpsr = lsm_state == 4'b0010 ? outcpsr : cpsr_3a;
+ next_outcpsrup = cpsrup_3a;
+ end
`DECODE_ALU_HDATA_REG,
- `DECODE_ALU_HDATA_IMM: if(!inbubble) begin
+ `DECODE_ALU_HDATA_IMM: if(!bubble_3a) begin
next_write_reg = 1'bx;
next_write_num = 4'bxxxx;
next_write_data = 32'hxxxxxxxx;
case(lsrh_state)
`LSRH_MEMIO: begin
- next_write_num = insn[15:12];
+ next_write_num = insn_3a[15:12];
next_write_data = lsrh_rddata;
- if(insn[20]) begin
+ if(insn_3a[20]) begin
next_write_reg = 1'b1;
end
end
`LSRH_BASEWB: begin
next_write_reg = 1'b1;
- next_write_num = insn[19:16];
+ next_write_num = insn_3a[19:16];
next_write_data = addr;
end
`LSRH_WBFLUSH:
endcase
end
`DECODE_LDRSTR_UNDEFINED: begin end
- `DECODE_LDRSTR: if(!inbubble) begin
+ `DECODE_LDRSTR: if(!bubble_3a) begin
next_write_reg = 1'bx;
next_write_num = 4'bxxxx;
next_write_data = 32'hxxxxxxxx;
case(lsr_state)
`LSR_MEMIO: begin
- next_write_reg = insn[20] /* L */;
- next_write_num = insn[15:12];
- if(insn[20] /* L */) begin
- next_write_data = insn[22] /* B */ ? {24'h0, align_rddata[7:0]} : align_rddata;
+ next_write_reg = insn_3a[20] /* L */;
+ next_write_num = insn_3a[15:12];
+ if(insn_3a[20] /* L */) begin
+ next_write_data = insn_3a[22] /* B */ ? {24'h0, align_rddata[7:0]} : align_rddata;
end
end
`LSR_STRB_WR:
next_write_reg = 1'b0;
`LSR_BASEWB: begin
next_write_reg = 1'b1;
- next_write_num = insn[19:16];
+ next_write_num = insn_3a[19:16];
next_write_data = addr;
end
`LSR_WBFLUSH:
default: begin end
endcase
end
- `DECODE_LDMSTM: if(!inbubble) begin
+ `DECODE_LDMSTM: if(!bubble_3a) begin
next_write_reg = 1'bx;
next_write_num = 4'bxxxx;
next_write_data = 32'hxxxxxxxx;
`LSM_SETUP:
next_write_reg = 1'b0;
`LSM_MEMIO: begin
- if(insn[20]) begin
- next_write_reg = !rw_wait;
+ if(insn_3a[20] /* L */) begin
+ next_write_reg = !dc__rw_wait_3a;
next_write_num = cur_reg;
- next_write_data = rd_data;
+ next_write_data = dc__rd_data_3a;
end else
next_write_reg = 1'b0;
end
`LSM_BASEWB: begin
- next_write_reg = insn[21] /* writeback */;
- next_write_num = insn[19:16];
- next_write_data = insn[23] ? op0 + {26'b0, prev_offset} : op0 - {26'b0, prev_offset};
- if(cur_reg == 4'hF && insn[22]) begin
- next_outcpsr = spsr;
+ next_write_reg = insn_3a[21] /* writeback */;
+ next_write_num = insn_3a[19:16];
+ next_write_data = insn_3a[23] ? op0_3a + {26'b0, prev_offset} : op0_3a - {26'b0, prev_offset};
+ if(cur_reg == 4'hF && insn_3a[22]) begin
+ next_outcpsr = spsr_3a;
next_outcpsrup = 1;
end
end
default: begin end
endcase
end
- `DECODE_MRCMCR: if(!inbubble) begin
+ `DECODE_MRCMCR: if(!bubble_3a) begin
next_write_reg = 1'bx;
next_write_num = 4'bxxxx;
next_write_data = 32'hxxxxxxxx;
next_outcpsr = 32'hxxxxxxxx;
next_outcpsrup = 1'bx;
- if (insn[20] == 1 /* load from coprocessor */)
- if (insn[15:12] != 4'hF /* Fuck you ARM */) begin
+ if (insn_3a[20] == 1 /* load from coprocessor */)
+ if (insn_3a[15:12] != 4'hF /* Fuck you ARM */) begin
next_write_reg = 1'b1;
- next_write_num = insn[15:12];
+ next_write_num = insn_3a[15:12];
next_write_data = cp_read;
end else begin
- next_outcpsr = {cp_read[31:28], cpsr[27:0]};
+ next_outcpsr = {cp_read[31:28], cpsr_3a[27:0]};
next_outcpsrup = 1;
end
end
/* Bus/address control logic. */
always @(*)
begin
- rd_req = 1'b0;
- wr_req = 1'b0;
+ dc__rd_req_3a = 1'b0;
+ dc__wr_req_3a = 1'b0;
offset = prev_offset;
addr = prevaddr;
raddr = 32'hxxxxxxxx;
- busaddr = 32'hxxxxxxxx;
- data_size = 3'bxxx;
+ dc__addr_3a = 32'hxxxxxxxx;
+ dc__data_size_3a = 3'bxxx;
- casez(insn)
- `DECODE_ALU_SWP: if(!inbubble) begin
- busaddr = {op0[31:2], 2'b0};
- data_size = insn[22] ? 3'b001 : 3'b100;
+ casez(insn_3a)
+ `DECODE_ALU_SWP: if(!bubble_3a) begin
+ dc__addr_3a = {op0_3a[31:2], 2'b0};
+ dc__data_size_3a = insn_3a[22] ? 3'b001 : 3'b100;
case(swp_state)
`SWP_READING:
- rd_req = 1'b1;
+ dc__rd_req_3a = 1'b1;
`SWP_WRITING:
- wr_req = 1'b1;
+ dc__wr_req_3a = 1'b1;
default: begin end
endcase
end
- `DECODE_ALU_MULT: begin end
+ `DECODE_ALU_MULT: begin
+ dc__rd_req_3a = 1'b0; /* XXX workaround for Xilinx bug */
+ dc__wr_req_3a = 1'b0;
+ offset = prev_offset;
+ addr = prevaddr;
+ end
`DECODE_ALU_HDATA_REG,
- `DECODE_ALU_HDATA_IMM: if(!inbubble) begin
- addr = insn[23] ? op0 + op1 : op0 - op1; /* up/down select */
- raddr = insn[24] ? op0 : addr; /* pre/post increment */
- busaddr = raddr;
+ `DECODE_ALU_HDATA_IMM: if(!bubble_3a) begin
+ addr = insn_3a[23] ? op0_3a + op1_3a : op0_3a - op1_3a; /* up/down select */
+ raddr = insn_3a[24] ? op0_3a : addr; /* pre/post increment */
+ dc__addr_3a = raddr;
/* rotate to correct position */
- case(insn[6:5])
+ case(insn_3a[6:5])
2'b01: /* unsigned half */
- data_size = 3'b010;
+ dc__data_size_3a = 3'b010;
2'b10: /* signed byte */
- data_size = 3'b001;
+ dc__data_size_3a = 3'b001;
2'b11: /* signed half */
- data_size = 3'b010;
+ dc__data_size_3a = 3'b010;
default: begin
- wr_data = 32'hxxxxxxxx;
- data_size = 3'bxxx;
+ dc__data_size_3a = 3'bxxx;
end
endcase
case(lsrh_state)
`LSRH_MEMIO: begin
- rd_req = insn[20];
- wr_req = ~insn[20];
+ dc__rd_req_3a = insn_3a[20];
+ dc__wr_req_3a = ~insn_3a[20];
end
`LSRH_BASEWB: begin end
`LSRH_WBFLUSH: begin end
endcase
end
`DECODE_LDRSTR_UNDEFINED: begin end
- `DECODE_LDRSTR: if(!inbubble) begin
- addr = insn[23] ? op0 + op1 : op0 - op1; /* up/down select */
- raddr = insn[24] ? addr : op0; /* pre/post increment */
- busaddr = raddr;
- wr_data = insn[22] ? {24'h0, {op2[7:0]}} : op2;
- data_size = insn[22] ? 3'b001 : 3'b100;
+ `DECODE_LDRSTR: if(!bubble_3a) begin
+ addr = insn_3a[23] ? op0_3a + op1_3a : op0_3a - op1_3a; /* up/down select */
+ raddr = insn_3a[24] ? addr : op0_3a; /* pre/post increment */
+ dc__addr_3a = raddr;
+ dc__data_size_3a = insn_3a[22] ? 3'b001 : 3'b100;
case (lsr_state)
`LSR_MEMIO: begin
- rd_req = insn[20] /* L */ || insn[22] /* B */;
- wr_req = !insn[20] /* L */ && !insn[22]/* B */;
+ dc__rd_req_3a = insn_3a[20] /* L */ || insn_3a[22] /* B */;
+ dc__wr_req_3a = !insn_3a[20] /* L */ && !insn_3a[22]/* B */;
end
`LSR_STRB_WR:
- wr_req = 1;
+ dc__wr_req_3a = 1;
`LSR_BASEWB: begin end
`LSR_WBFLUSH: begin end
default: begin end
endcase
end
- `DECODE_LDMSTM: if (!inbubble) begin
- data_size = 3'b100;
+ `DECODE_LDMSTM: if (!bubble_3a) begin
+ dc__data_size_3a = 3'b100;
case (lsm_state)
`LSM_SETUP:
offset = 6'b0;
`LSM_MEMIO: begin
- rd_req = insn[20];
- wr_req = ~insn[20];
+ dc__rd_req_3a = insn_3a[20];
+ dc__wr_req_3a = ~insn_3a[20];
offset = prev_offset + 6'h4;
- offset_sel = insn[24] ? offset : prev_offset;
- raddr = insn[23] ? op0 + {26'b0, offset_sel} : op0 - {26'b0, offset_sel};
- busaddr = raddr;
+ offset_sel = insn_3a[24] ? offset : prev_offset;
+ raddr = insn_3a[23] ? op0_3a + {26'b0, offset_sel} : op0_3a - {26'b0, offset_sel};
+ dc__addr_3a = raddr;
end
`LSM_BASEWB: begin end
`LSM_WBFLUSH: begin end
/* Bus data control logic. */
always @(*)
begin
- wr_data = 32'hxxxxxxxx;
+ dc__wr_data_3a = 32'hxxxxxxxx;
- casez(insn)
- `DECODE_ALU_SWP: if(!inbubble)
+ casez(insn_3a)
+ `DECODE_ALU_SWP: if(!bubble_3a)
if (swp_state == `SWP_WRITING)
- wr_data = insn[22] ? {4{op1[7:0]}} : op1;
+ dc__wr_data_3a = insn_3a[22] ? {4{op1_3a[7:0]}} : op1_3a;
`DECODE_ALU_MULT: begin end
`DECODE_ALU_HDATA_REG,
- `DECODE_ALU_HDATA_IMM: if(!inbubble)
- case(insn[6:5])
+ `DECODE_ALU_HDATA_IMM: if(!bubble_3a)
+ case(insn_3a[6:5])
2'b01: /* unsigned half */
- wr_data = {2{op2[15:0]}}; /* XXX need to store halfword */
+ dc__wr_data_3a = {2{op2_3a[15:0]}}; /* XXX need to store halfword */
2'b10: /* signed byte */
- wr_data = {4{op2[7:0]}};
+ dc__wr_data_3a = {4{op2_3a[7:0]}};
2'b11: /* signed half */
- wr_data = {2{op2[15:0]}};
+ dc__wr_data_3a = {2{op2_3a[15:0]}};
default: begin end
endcase
`DECODE_LDRSTR_UNDEFINED: begin end
- `DECODE_LDRSTR: if(!inbubble) begin
- wr_data = insn[22] ? {24'h0, {op2[7:0]}} : op2;
+ `DECODE_LDRSTR: if(!bubble_3a) begin
+ dc__wr_data_3a = insn_3a[22] ? {24'h0, {op2_3a[7:0]}} : op2_3a;
if (lsr_state == `LSR_STRB_WR)
- case (busaddr[1:0])
- 2'b00: wr_data = {rd_data_latch[31:8], op2[7:0]};
- 2'b01: wr_data = {rd_data_latch[31:16], op2[7:0], rd_data_latch[7:0]};
- 2'b10: wr_data = {rd_data_latch[31:24], op2[7:0], rd_data_latch[15:0]};
- 2'b11: wr_data = {op2[7:0], rd_data_latch[23:0]};
+ case (dc__addr_3a[1:0])
+ 2'b00: dc__wr_data_3a = {rd_data_latch[31:8], op2_3a[7:0]};
+ 2'b01: dc__wr_data_3a = {rd_data_latch[31:16], op2_3a[7:0], rd_data_latch[7:0]};
+ 2'b10: dc__wr_data_3a = {rd_data_latch[31:24], op2_3a[7:0], rd_data_latch[15:0]};
+ 2'b11: dc__wr_data_3a = {op2_3a[7:0], rd_data_latch[23:0]};
endcase
end
- `DECODE_LDMSTM: if (!inbubble)
- if (lsr_state == `LSM_MEMIO)
- wr_data = (cur_reg == 4'hF) ? (pc + 12) : st_data;
+ `DECODE_LDMSTM: if (!bubble_3a)
+ if (lsm_state == `LSM_MEMIO)
+ dc__wr_data_3a = (cur_reg == 4'hF) ? (pc_3a + 12) : rf__rdata_3_3a;
`DECODE_LDCSTC: begin end
`DECODE_CDP: begin end
`DECODE_MRCMCR: begin end
end
/* LDM/STM register control logic. */
+ always @(posedge clk)
+ if (!dc__rw_wait_3a || lsm_state != `LSM_MEMIO)
+ begin
+ prev_reg <= cur_reg;
+ regs <= next_regs;
+ end
+
always @(*)
begin
- offset = prev_offset;
+ rf__read_3_3a = 4'hx;
cur_reg = prev_reg;
next_regs = regs;
- casez(insn)
- `DECODE_LDMSTM: if(!inbubble) begin
+ casez(insn_3a)
+ `DECODE_LDMSTM: if(!bubble_3a) begin
case(lsm_state)
`LSM_SETUP:
- next_regs = insn[23] /* U */ ? op1[15:0] : {op1[0], op1[1], op1[2], op1[3], op1[4], op1[5], op1[6], op1[7],
- op1[8], op1[9], op1[10], op1[11], op1[12], op1[13], op1[14], op1[15]};
+ next_regs = insn_3a[23] /* U */ ? op1_3a[15:0] : {op1_3a[0], op1_3a[1], op1_3a[2], op1_3a[3], op1_3a[4], op1_3a[5], op1_3a[6], op1_3a[7],
+ op1_3a[8], op1_3a[9], op1_3a[10], op1_3a[11], op1_3a[12], op1_3a[13], op1_3a[14], op1_3a[15]};
`LSM_MEMIO: begin
casez(regs)
16'b???????????????1: begin
next_regs = 16'b0;
end
endcase
- cur_reg = insn[23] ? cur_reg : 4'hF - cur_reg;
-
- if (rw_wait) begin
- next_regs = regs;
- cur_reg = prev_reg; /* whoops, do this one again */
- end
+ cur_reg = insn_3a[23] ? cur_reg : 4'hF - cur_reg;
- st_read = cur_reg;
+ rf__read_3_3a = cur_reg;
end
`LSM_BASEWB: begin end
`LSM_WBFLUSH: begin end
always @(*)
begin
- st_read = 4'hx;
do_rd_data_latch = 0;
- next_outbubble = inbubble;
+ next_outbubble = bubble_3a;
lsrh_rddata = 32'hxxxxxxxx;
lsrh_rddata_s1 = 16'hxxxx;
lsrh_rddata_s2 = 8'hxx;
next_swp_oldval = swp_oldval;
+
+ align_s1 = 32'hxxxxxxxx;
+ align_s2 = 32'hxxxxxxxx;
+ align_rddata = 32'hxxxxxxxx;
/* XXX shit not given about endianness */
- casez(insn)
- `DECODE_ALU_SWP: if(!inbubble) begin
- next_outbubble = rw_wait;
+ casez(insn_3a)
+ `DECODE_ALU_SWP: if(!bubble_3a) begin
+ next_outbubble = dc__rw_wait_3a;
case(swp_state)
`SWP_READING:
- if(!rw_wait)
- next_swp_oldval = rd_data;
+ if(!dc__rw_wait_3a)
+ next_swp_oldval = dc__rd_data_3a;
`SWP_WRITING: begin end
default: begin end
endcase
end
- `DECODE_ALU_MULT: begin end
+ `DECODE_ALU_MULT: begin
+ next_outbubble = bubble_3a; /* XXX workaround for Xilinx bug */
+ end
`DECODE_ALU_HDATA_REG,
- `DECODE_ALU_HDATA_IMM: if(!inbubble) begin
- next_outbubble = rw_wait;
+ `DECODE_ALU_HDATA_IMM: if(!bubble_3a) begin
+ next_outbubble = dc__rw_wait_3a;
/* rotate to correct position */
- case(insn[6:5])
+ case(insn_3a[6:5])
2'b01: begin /* unsigned half */
- lsrh_rddata = {16'b0, raddr[1] ? rd_data[31:16] : rd_data[15:0]};
+ lsrh_rddata = {16'b0, raddr[1] ? dc__rd_data_3a[31:16] : dc__rd_data_3a[15:0]};
end
2'b10: begin /* signed byte */
- lsrh_rddata_s1 = raddr[1] ? rd_data[31:16] : rd_data[15:0];
+ lsrh_rddata_s1 = raddr[1] ? dc__rd_data_3a[31:16] : dc__rd_data_3a[15:0];
lsrh_rddata_s2 = raddr[0] ? lsrh_rddata_s1[15:8] : lsrh_rddata_s1[7:0];
lsrh_rddata = {{24{lsrh_rddata_s2[7]}}, lsrh_rddata_s2};
end
2'b11: begin /* signed half */
- lsrh_rddata = raddr[1] ? {{16{rd_data[31]}}, rd_data[31:16]} : {{16{rd_data[15]}}, rd_data[15:0]};
+ lsrh_rddata = raddr[1] ? {{16{dc__rd_data_3a[31]}}, dc__rd_data_3a[31:16]} : {{16{dc__rd_data_3a[15]}}, dc__rd_data_3a[15:0]};
end
default: begin
lsrh_rddata = 32'hxxxxxxxx;
endcase
end
`DECODE_LDRSTR_UNDEFINED: begin end
- `DECODE_LDRSTR: if(!inbubble) begin
- next_outbubble = rw_wait;
+ `DECODE_LDRSTR: if(!bubble_3a) begin
+ next_outbubble = dc__rw_wait_3a;
/* rotate to correct position */
- align_s1 = raddr[1] ? {rd_data[15:0], rd_data[31:16]} : rd_data;
+ align_s1 = raddr[1] ? {dc__rd_data_3a[15:0], dc__rd_data_3a[31:16]} : dc__rd_data_3a;
align_s2 = raddr[0] ? {align_s1[7:0], align_s1[31:8]} : align_s1;
/* select byte or word */
- align_rddata = insn[22] ? {24'b0, align_s2[7:0]} : align_s2;
+ align_rddata = insn_3a[22] ? {24'b0, align_s2[7:0]} : align_s2;
case(lsr_state)
`LSR_MEMIO:
- if (insn[22] /* B */ && !insn[20] /* L */)
+ if (insn_3a[22] /* B */ && !insn_3a[20] /* L */)
do_rd_data_latch = 1;
`LSR_STRB_WR: begin end
`LSR_BASEWB:
endcase
end
/* XXX ldm/stm incorrect in that stupid case where one of the listed regs is the base reg */
- `DECODE_LDMSTM: if(!inbubble) begin
- next_outbubble = rw_wait;
+ `DECODE_LDMSTM: if(!bubble_3a) begin
+ next_outbubble = dc__rw_wait_3a;
case(lsm_state)
`LSM_SETUP: begin end
`LSM_MEMIO: begin end
endcase
end
`DECODE_LDCSTC: begin end
- `DECODE_CDP: if(!inbubble) begin
+ `DECODE_CDP: if(!bubble_3a) begin
if (cp_busy) begin
next_outbubble = 1;
end
end
- `DECODE_MRCMCR: if(!inbubble) begin
+ `DECODE_MRCMCR: if(!bubble_3a) begin
if (cp_busy) begin
next_outbubble = 1;
end
git.joshuawise.com / firearm.git / blobdiff